Barco Display Tab
Barco Display Tab
Introduction
The Barco Display Tab is used for gathering information about the BarcoMed Flat Panel Display(s).
To access the Barco Display Tab do the following:
1.Open the “Display Properties Control Panel” by right clicking on the desktop, then select “Properties”.
Using the Barco Display Tab
Displays
All of the available display adapters that are of the same type as the current barco display adapter are shown here graphically, with one display icon representing each port of a display adapter. The icon orientation reflects the display resolution. Only those ports with a display attached to them are active. If an icon is grayed out, that indicates a port with no head attached to it. When running DualView under Windows 2000 and Windows XP the desktop must be extended to include each display, otherwise those ports will not be visible to the Barco Display Tab.
Hovering the cursor over a display icon will pop up a window with information that identifies the display.
Properties
You may access the Properties page of the currently selected display, which is represented by the monitor icon above with the black frame around it, by either clicking on the “Properties” button or double clicking on the icon.
BarcoMFD library
This is the version of the barcomfd library currently used. This library provides APIs for interacting with the displays.
47
