Barco MGP 15 user manual bSingle-headwith two projectors, Introduction

Introduction

4.Connect the I-Guard optical sensor to a free PC USB downstream connector. If the cable is not long enough, you have to use a USB booster/extender.

Installation of the sensor is described more in detail in the section “MediCal and Dicom Theater software installation and usage”.

b)Single-head with two projectors

USB

USB

RS-232

VIDEO

RS-232

Video

USB

RS-232

Video

VIDEO

RS-232

VIDEO

RS-232

Figure 2

Proceed as follows:

1.Connect one PC video output to the first projector BNC input by means of the DVI-to-5 BNC cable (15 m / 50 ft).

2.Connect the other video output to the second projector BNC input by means of the DVI-to-5 BNC cable (15 m / 50 ft).

3.Connect a free PC COM port to the first projector RS-232 connector by means of a D-Sub9-to-D-Sub9 cable (15 m / 50 ft).

16