Barco MGP 15 user manual Installing or Reinstalling Barco DPMS, Barco DPMS Screen Saver

Barco DPMS Screen Saver

4.Select one of the default schemes from the “Current Scheme” drop down menu.

5.Set the Work Schedule by setting the beginning and ending time of your work day for each day of the week.

6.Select the screen saver you wish to use during the work day in the “Screen Saver During Work Day” section.

7.Select the amount of time you wish to spend in the Stand-By and Suspend states after the work day has ended. Please note that after the time specified has elapsed when you are in Stand-By or Suspend, you will automatically go into the Off state.

8.Select the amount of time it takes for your display to warm up. If you have a Barco Medical Display, select “Barco Quick Start”. If you are using a non-Barco display, select the amount of time it takes your display to warm up via the “Monitor Setting” section. Contact your display vendor for this warm-up time. On Barco CORONIS displays, the I-GUARD will stabilize the image within a few seconds after the display returns to the active state, thus eliminating the need for a warm-up period at the beginning of the work day.

9.If you wish to use this DPMS screen saver as the screen saver at logon time, check the “Use As Logon Screen Saver” box in the “Additional Options” section.

10.Save your preferences by pressing the “Save As” button and entering a new profile name in the “Save Profile Setting” dialog box.

11.Apply your new scheme by clicking “OK”.

12.Click “OK” again to close the “Display Properties Control Panel”.

Installing or Reinstalling Barco DPMS

To install or reinstall the Barco DPMS Screen Saver insert the

CORONIS Software CD in the appropriate device on your computer

72