Controlling the projector
4.Select the desired input source in the Source selection section.
Picture-in-picture selection
To switch
1.Position the cursor over the Dicom Theater
The Dicom Theater menu appears.
2.Click Projector Control.
The projector control view appears.
3.Click the tab of the projector you wish to control.
4.Select the desired
For more information about
Projector on/off status selection
To switch the projector in one of the on/off states, proceed as follows:
1.Position the cursor over the Dicom Theater
The Dicom Theater menu appears.
2.Click Projector Control.
The projector control view appears.
3.Click the tab of the projector you wish to control.
4.Select the desired on/off state in the Projector section.
For more information about the different states, please refer to the MGP 15 Owner’s Manual.
86