Introduction
display other images, like presentations. Calibration and stabilization is done by using the external optical sensor, which is installed at the side of the large screen.
The LCD display is used as review display in the Dicom Theater system. Calibration and stabilization of the display is done by means of the
The MediCal Pro software is used for defining the Preset the display devices must be conform to and calibrate them to make them conform to the Preset.
The Dicom Theater software is a systray tool normally operating in background. With the aid of the external optical sensor, this piece of software ensures the stabilization of the projector. In addition, you can use the Dicom Theater software to control some of the projector’s functions.
Other relevant documentation
•MediCal Pro® Installation and User Manual: Describes in detail how to install and use the MediCal Pro software.
•Owner’s manual for Medical Grade Projector MGP 15: Describes in detail how to connect, use and control the MGP 15 projector.
•Installation Manual Ceiling Mount for MGP 15: Describes in detail how to install the ceiling mount kit for the MGP 15 projector.
•Display User Manual
Important installation considerations
1.Make sure all equipment is switched off before installing.
2.In case you use a PCI extension box, please install the box following the guidelines in its Installation or User's guide.
12