Barco DPMS Screen Saver
3.Use the default schemes by selecting one of the three default schemes. Click “OK”. Then Click “OK” again.
Note: If you make any changes to any of the settings of one of the three default schemes, the Current Scheme field will blank and you MUST SAVE your changes by clicking on the “Save As ...” button. When you click on the “Save As ...” button, the name of the last scheme you used will be automatically displayed, you can then choose to use that scheme name or enter a new name. If you enter a name other than one of the three default scheme names, the program will ask you if you wish to save the scheme as a DEFAULT scheme (figure 26 on page 71). Click “Yes” to save the settings scheme as a DEFAULT scheme, click “No” to save the scheme as a PRIVATE scheme. After you have saved the scheme, then click OK and the new scheme will be in effect.
Figure 26
To create a new scheme by modifying one of the three default schemes please do the following.
1.Open the “Display Properties Control Panel” by right clicking on an empty space of the desktop and selecting “Properties” from the drop down menu; then select the “Screen Saver” tab.
2.Select the “Barco DPMS Screen Saver” in the “Screen Saver” drop down menu if it is not already selected.
3.Click on the “Settings” button. The “Barco DPMS Screen Saver Control Panel” will open.
71
