Barco MGP 15 user manual cSingle-headwith one projector picture-in-picture, Introduction

Introduction

4.Connect a free PC COM port to the second projector RS-232 connector by means of a D-Sub9-to-D-Sub9 cable (15 m / 50 ft).

5.Connect the first I-Guard optical sensor to a free PC USB downstream connector. If the cable is not long enough, you have to use a USB booster/extender.

6.Connect the second I-Guard optical sensor to a free PC USB downstream connector. If the cable is not long enough, you have to use a USB booster/extender.

Installation of the sensor is described more in detail in the section “MediCal and Dicom Theater software installation and usage”.

c)Single-head with one projector (picture-in-picture)

USB

RS-232

USB

VIDEO

VIDEO

RS-232

RS-232

Video

Video

VIDEO

Figure 3

Proceed as follows:

1.Connect one video output to the projector BNC input by means of the DVI-to-5 BNC cable (15 m / 50 ft).

2.Connect the other video output to the projector D-Sub15 (VGA) input by means of the DVI-to-VGA cable (15 m / 50 ft).

17