Windows 2000 BarcoMed 2MP2CP software installation
Figure 12
Driver installation
6.Click “Next” on the Display Driver Wizard’s Welcome Screen to continue or “Cancel” to exit the Display Driver Wizard and return to the Software Install Wizard.
The Device Selection Screen’s dialog box (figure 13 on
page 39) should show only those devices physically installed and supported by the BarcoMed display controller driver on your BarcoMed Software CD. Select the device you want to install and then click “Next”.
Note: If there are no BarcoMed devices installed, or if Windows does not recognize the installed devices, or if the driver on your BarcoMed Software CD does not support the installed devices, the dialog box will be empty1, and the BarcoMed driver wizard will exit when you click “Finish” or “Cancel”.
1.If Windows does not recognize the installed BarcoMed device, special settings may need to be made in the BIOS to support
38