Barco MGP 15 Uninstalling the BarcoMed 2MP2CP driver, Driver re-installation,updates or removal

Driver re-installation, updates or removal

3.To update the driver, clear the checkbox next to (figure 38) and click “Install”.

Figure 38

4.For Windows 2000 or Windows XP please turn to Step 6 on page 38 in the section titled “Windows 2000 BarcoMed 2MP2CP software installation” and follow the instructions to finish reinstalling or updating your BarcoMed 2MP2CP driver.

When the driver has finished installing, click “Finish”. Then click “Finish” again.

Reboot the system when prompted and then reset the resolution of your displays if necessary.

Uninstalling the BarcoMed 2MP2CP driver

Special Note: The BarcoMed Uninstaller is supported only on Windows 2000 and Windows XP.

To remove the BarcoMed 2MP2CP display controller driver from your system you must be logged in using an account with administrator privileges.

98