Returning to a Pre-marked Position

If you wish to return to a particular scene later, mark the point with the zero set memory and the tape will stop at that point when you rewind/fast forward the tape. This function is operated with the wireless controller.

( 21)

1While recording or during playback, press ZERO SET MEMORY at the point you wish to return to later.

•The time code changes to “0:00:00 ”.

•Press ZERO SET MEM RY again to cancel the memory.

2If you marked the zero memory

while recording, set the

camcorder to mode. If you marked the zero memory during playback, press STOP .

3Press to locate the zero mark.

•If the tape counter shows a negative number, press instead.

• appears and the camcorder rewinds/fast forwards the tape.

•The tape stops at or near the zero

mark, disappears and the correct time code will be displayed again.

NOTES

If there are blank sections between recordings, the zero set memory may not work correctly.

Locating the Beginning of a Recording Date

You can locate the change of the date/ time zone with the date search function.

( 21)

Press or on the wireless controller.

•ress more than once to search for further date changes (up to 10 times).

• To cancel the search press STOP .

NOTES

•The date search function will not detect recordings shorter than 1 minute per date/time zone.

•Date search may not function if the data code is not displayed correctly.

35