recording when copying is complete.

6This camcorder: Stop playback.

NOTES

•We recommend powering the camcorder using the compact power adapter.

•When recording to a VCR using an analog connection –connection type

1 ( 49)–, the quality of the edited tape will be lower than the original.

•When recording to a digital video recorder using the DV terminal

–connection type 2 ( 49)–:

-If the picture does not appear, disconnect the DV cable and restore the connection after a short while or turn the camcorder off and then on again.

-Proper operation cannot be guaranteed for all digital devices equipped with a DV terminal. If the operation does not work, use the AV terminal.

Digital Video Dubbing

You can input video from other digital video devices and record the input video on the tape in the camcorder.

( 21)

Connecting

Connect the camcorder to the video input source using the digital connection –connection type 2

( 49)– shown in Connection Diagrams.

Dubbing

FUNC.

( 22)

1Load a blank tape in the camcorder and load the recorded (source) tape or disc in the connected device.

2Set the camcorder in record pause mode.

FUNC. [ REC PAUSE] [EXECUTE]

3Connected device: Start the playback.

In record pause mode and while recording you can check the picture on the camcorder’s screen.

51