External Connections
4When the scene you wish to record appears, push the joystick
(
) toward 
/
to begin recording.
Recording starts.
5While recording, push the joystick
(
) toward 
/
to record pause. In record pause mode, push the
joystick (
) toward 
/
again to resume recording.
6Push the joystick (
) toward 
to stop recording.
7Connected device: Stop the playback.
IMPORTANT
•Blank sections may be recorded as anomalous picture.
•If the picture does not appear, disconnect the DV cable and restore the connection after a short while or turn the camcorder off and then on again.
•You can only record video signals in DV standard (standard definition, SP or LP
mode) from devices carrying the 
logo. Note that signals from identically shaped DV (IEEE1394) terminals may be in different video standards.
NOTES
We recommend powering the camcorder using the compact power adapter.
Copyright Signal
Certain software tapes are copyright protected. If you attempt to play back such tape, “COPYRIGHT PROTECTED PLA BACK IS RESTRICTED” appears and you will not be able to view the contents of the tape. If you attempt to record from such tape via the DV terminal,
“CO RIGHT ROTECTED DUBBING RESTRICTED” appears and you will not be able to record the contents of the tape.
52