CHECK THE INPUT

-The DV cable is not correctly connected to the DV terminal ( 49), or the connected digital device is turned off.

-The video input signal is in a different television system (PAL or SECAM).

CONDENSATION HAS BEEN DETECTED

 

 

 

 

 

 

 

 

 

 

-

Condensation has been detected in the camcorder (

 

69).

 

 

 

 

 

CONDENSATION HAS BEEN DETECTED

REMOVE THE CASSETTE

 

 

-

Condensation has been detected in the camcorder (

 

69). Remove the cassette.

 

 

 

 

 

COPYRIGHT PROTECTED

DUBBING RESTRICTED

 

 

 

 

 

 

 

 

-

You attempted to dub a copyright protected tape (

 

 

52).

 

 

 

 

 

 

COPYRIGHT PROTECTED

PLAYBACK IS RESTRICTED

 

 

 

 

 

 

 

 

-

You attempted to play back a copyright protected tape (

 

 

52).

 

 

 

 

 

HEADS DIRTY, USE CLEANING CASSETTE

 

 

 

 

 

 

 

 

REMOVE THE CASSETTE

 

PLAYBACK

 

 

-

Video heads are dirty. Clean the video heads (

 

2).

 

 

 

 

 

 

INCORRECT TAPE SPECIFICATION

 

IS RESTRICTED

 

 

-

You attempted to play back a tape recorded in a different television system ( AL or SECAM) or in a recording

 

standard not supported by this camcorder.

 

 

 

 

 

 

 

 

INPUT SIGNAL N T SUPP

RTED

 

 

 

 

 

 

 

 

 

 

 

-

The digital device connected with the DV cable is incompatible with the camcorder.

 

 

-

amcorder stopped operating to protect the tape. Remove the cassette and reinsert it (

 

27).

 

SET THE TIME Z NE, DATE AND TIME

-You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time ( 24).

TAPE END

- Tape reached the end. Rewind the tape or replace the cassette.

THE TAPE IS SET FOR ERASURE PREVENTION

- assette is protected. Replace the cassette or change the position of the protect switch ( 67).

65