Capresso 13215, S7, S9 Cup Illumination, 7a. ADDING COFFEE BEANS, 7b. FIRST TIME GRINDING/BREWING

Models: S8 S9 S7 13215

1 29
Download 29 pages 63.23 Kb
Page 12
Image 12
RINSE UNIT

RINSE UNIT

Place a container under the coffee-spout (Fig. 8b) and press the RINSE button (Fig. 2,F).

UNIT RINSING

COFFEE READY

Attention: You can only make coffee when the display reads

COFFEE READY.

CUP ILLUMINATION

The cup illumination adds a dramatic touch to brewing coffee. Providing the machine is plugged in, you can activate the cup illumination for 3 minutes by pressing any button.

7a. ADDING COFFEE BEANS

Lift up cover of the bean container (Fig. 5) and remove aroma protection lid (Fig. 6).

Clean out any dirt or foreign objects from the bean container.

Fill the bean container with coffee beans (Fig.7), replace the aroma protection lid (Fig.6), and close the cover.

7b. FIRST TIME GRINDING/BREWING

Move the coffee spout up (Fig.8b).

Put a large cup underneath the coffee spout.

Make sure there is water in the tank.

Push the SPECIAL COFFEE button (Fig.2,C).

The machine will start grinding. Then it will pre-brew, pause, and continue brewing. It will brew approx. 8 oz. of coffee. During the first brewing cycle the coffee will be extremely weak since some of the ground coffee stays in the connector channel between the grinder and the brewing chamber. Your next cup of coffee will be fine.

8. ADJUSTING THE GRINDER

You can adjust the grinder to the roast of your coffee. We recommend the following:

Light roast: use a finer adjustment.

Dark roast: use a coarser adjustment.

Open the cover of the bean container (Fig.5).

To adjust grinding turn the selector switch to the desired

position (Fig.9).

You have the following possibilities:

The smaller the dots, the finer the grinding.

The bigger the dots, the coarser the grinding. IMPORTANT: The grinding grade can only be adjusted while the grinder is actually grinding.

ATTENTION: Oily beans tend to stick together. Stir beans just before grinding to ensure a proper flow of beans into the burrs.

9. RINSING THE MACHINE

The machine will automatically complete a rinse cycle when it is turned off (or when the machine turns off automatically). When the machine is cold and you turn the machine on it will warm up.

PLEASE WAIT

RINSE UNIT

• Place an empty cup under the coffee-spout (Fig. 8b) and press the RINSE button.

You can always rinse at any time. Just press the RINSE button.

12.

Page 12
Image 12
Capresso 13215, S7, S9, S8 Cup Illumination, 7a. ADDING COFFEE BEANS, 7b. FIRST TIME GRINDING/BREWING, Adjusting The Grinder