Capresso S8 Emptying The Used Water Tray, Fill Beans, Stones And Beans, Coffee Ready, Empty Tray

•Remove the used water tray carefully since there is water in it (Fig.1, Fig.18, Fig.19)

ATTENTION: Do not unplug the machine while you are emptying the coffee grounds.

•Empty the used coffee container and the water tray (drawer).

•Make sure the two metallic contacts of the drawer are clean and dry (Fig. 20).

•Replace the used coffee container and drawer.

COFFEE READY

16.3EMPTYING THE USED WATER TRAY

EMPTY TRAY

If this message shows on the display no more coffee can be made until you empty the drawer. Follow the instructions in chapter 16.2.

16.4FILL BEANS

FILL BEANS

• Fill beans as described in chapter 7a.

The message FILL BEANS will only disappear after making the next cup of coffee.

We recommend cleaning the bean container from time to time with a dry cloth before you refill beans (please make sure the machine is turned off when cleaning.)

16.5 STONES AND BEANS

Every coffee specialty store will tell you that occasionally small stones can be found in between coffee beans. Small stones will be processed through the burr grinder without any harm (the

stone will end up in the used coffee container).

However larger stones can block the burr grinder. The noise of the grinder will become very loud and the grinder will block.

Before Filling Beans into the Bean Container:

•Shake your bean bag thoroughly so that a stone will fall to the bottom of the bag.

•Before emptying the bean bag completely, check if there are any particles that look like stones and remove them.

16.6REMOVING STONES OR OTHER FOREIGN OBJECTS FROM THE BURR GRINDER

If the burr grinder is blocked, proceed as follows:

• Turn off the machine by pushing the ON/OFF button (Fig. 2,B). Wait until the machine has shut down completely.

• Unplug the machine.

• Open the bean container and remove all beans (scoop out beans or use a hand-held vacuum cleaner).

• Loosen the two screws in the bean container (Fig.24) and remove the bean container (Fig.25).

• If any beans remain, remove them.

• Attach the burr grinder release tool to the upper burr (Fig.26).

• If you cannot find this tool call 1-800-220-5701 and we will send the tool to you free of charge.

• Turn the tool counter-clockwise slowly until the stone becomes loose.

Attention: Do not try to turn the tool clockwise.

• Replace the bean container, and tighten the two screws.

• Turn machine on and test the grinder without beans to see if the blockage has disappeared.

23.