7.11 Cover Lid
The cover lid (L) minimizes static coffee particles clinging to the out- side of the filter holder.
•Open the water container lid (I).
•Make sure that the filter holder insert and the GoldTone filter (or your filter paper) are inserted in the filter holder (O).
•Place the cover lid on top of the filter holder insert (M) so that the large hole is on the left side.
Make sure that the front rim fits snugly into the groove created by the filter holder insert and the outside filter holder.
•Close the water container lid. Now you can swing the filter holder underneath the grinder.
•Cleaning: Wipe the lid clean
after each use. Do not clean in dishwasher!
Note: The lid has two parts: a soft, removable collar and a hard disk. If you accidentally remove the soft collar, just replace it in its original position (with the high rim pointing upwards).
soft collar
8.GRINDING AND BREWING COFFEE NOW
• Select cup and strength setting (see page 8, chapter 7.4).
• Fill beans into the bean container (see page 10, chapter 7.7).
• Fill water into the machine (see page 12, chapter 7.9).
• Make sure the filter holder insert, GoldTone filter (or paper filter) and cover lid are in place (see page 12, chapter 7.10 and 7.11).
•Swing the filter holder to the left until it locks itself underneath the grinder.
•Place the glass carafe on the heating plate (H). Note: Keep the carafe handle pointed straight outward during the brewing process. If the handle points to the right and the pouring spout of the carafe sits underneath the feeder channel, moisture from the freshly brewed
13
