Capresso 454 warranty 10e. Burr Grinder/Burrs, 10f. Cleaning The Feeder Channel

10c. Filter Holder Insert (M)/Drip Stop (N): Clean the filter holder insert and the drip stop under run- ning water. Check to make sure that the drip stop closes com- pletely under running water also.

10d. Bean Container (A): When the bean container is empty, use a dry cloth to wipe off any oil deposits. Never pour any liquid into the bean container. Never try to disassemble the bean container.

10e. Burr Grinder/Burrs:

It is possible that small coffee par- ticles might stick to the burrs. Once every 2 months let the bean container run out of beans. Remove the glass carafe. Set the grinder to 10 cups. Make sure the GoldTone filter is inserted. Move the filter holder underneath the grinder. Set the fineness selector to the largest dot. Push the on/off button. While the machine is grinding tilt the whole machine a bit forward and pat it on the back. This will loosen any coffee parti- cles and transport them into the

filter holder. Repeat if necessary.

10f. Cleaning The Feeder Channel

Periodically check the feeder channel for oil and coffee build-up. As long as you can see coffee flowing freely through the feeder channel window there is no need to open the cover.

The feeder channel should be cleaned in any of the following situations:

•moisture or heavy oil build-up has caused the ground coffee to block the feeder channel, or

•you do not plan on using the grinder for more than a week.

For cleaning, please follow this sequence:

a. Lift the water container lid and remove the cover lid. Make sure the GoldTone filter or a paper filter is inserted in the filter holder insert.

loose coffee

packed coffee

17