9.Grinding and Brewing Coffee Later
• Program the timer and grinder setting as described in chapter 7.5, page 8.
• Fill beans into the bean container (see page 10, chapter 7.7).
• Fill the desired amount of water into the machine (see page 12, chapter 7.9).
• Make sure the filter holder insert, GoldTone filter (or paper filter) and cover lid are in place.
• Caution: Before you swing the filter holder underneath the grinder, make sure there are no grounds left over in the filter holder insert from previous grinding.
• Swing the filter holder to the left until it locks itself underneath the grinder.
• Now push the “auto” button (G6). The green auto light will turn on and the programmed grinder setting will be displayed. At the programmed time, the green light will turn off, the red light will turn on, and the grinding /
brewing process will start.
10. Cleaning
CAUTION: Make sure machine is turned off and cooled down. Never use scouring agents. Never immerse the machine in any liquid. Never clean machine under running water.
Dishwasher safe (upper rack): Glass carafe (remove
Special Cleaning Tips:
10a. Cover Lid (L): Wipe the cover lid clean after each use. Do not clean in the dishwasher. If the soft collar becomes separated from the hard disk, simply replace it with the high rim pointing upwards.
10b. GoldTone Filter: Clean after brewing. Do not let used coffee sit for hours in the filter. Coffee oils will clog the mesh, causing the coffee to overflow the next time you brew coffee.
soft collar
16
