Capresso 454 warranty Note If you want your coffee ready at 700 AM, set the timer to 645 AM

b. Push the "prog" button (G10). The saucer blinks. The display will read "AM 12:00" and shows the number "10" in bold.

c. Push and hold the”h”-button (G8) to program the hour at which you would like to make coffee later. Push and hold the “m”-button (G9) to program the minutes at which you would like to make coffee later. Now the time to make coffee later is programmed.

d. Push and hold the "2-10" button (G11) until the desired number is displayed in bold. Release this button. Then push and hold the "strength" button (G12) until the saucer sits under the desired cup. Release this button.

Note: Within 5 seconds the dis- play will return to the current mode and the current grinder settings. To check if you are in the programming mode or in the current mode just look at the saucer. If the saucer is not blink- ing you are in the current mode. If the saucer is blinking you are in the programming mode.

e. If you wish to check the pro- grammed settings, push the "prog" button (G10). The display will show you the future time and the future grinder settings.

Note: The settings for the grinder can be different in the program mode and in the regular (current) mode.

Note: If you want your coffee ready at 7:00 AM, set the timer to 6:45 AM.

See chapter 9, page 16 for "Grinding and Brewing Coffee Later".

9