Carrier 25HCR3C warranty Physical Data, Unit SIZE---SERIES, Voltage

PHYSICAL DATA

UNIT SIZE---SERIES, VOLTAGE	18---30	24---30	30---30	36---30	42---30	48---30	60---30
Operating Weight lb (kg)	207	204	211	252	239	314	361
	(93.9)	(92.5)	(95.7)	(114.3)	(108.4)	(142.4)	(163.8)
Shipping Weight lb (kg)	218	236	222	287	250	348	395
	(98.9)	(107.1)	(100.7)	(130.2)	(113.4)	(157.9)	(179.2)
Compressor Type				Scroll
REFRIGERANT			Freon (R--- 22)
Control			TXV (R--- 22 Hard Shutoff)
Charge lb (kg)	7	7	6.8	8.1	9.5	13.5	16.5
	(3.2)	(3.2)	(3.1)	(3.7)	(4.3)	(6.1)	(7.5)
COND FAN
Air Discharge				Vertical
Air Qty (CFM)	2233	2614	3167	3334	3334	4046	4046
Motor HP	1/12	1/10	1/5	1/8	1/8	1/4	1/4
Motor RPM	800	800	800	800	800	800	800
COND COIL
Face Area (Sq ft)	19.4	21.56	19.40	25.15	17.60	25.15	30.18
Fins per In.	20	20	20	20	20	20	20
Rows	1	1	1	1	2	2	2
Circuits	5	6	6	6	8	8	11
VALVE CONNECT. (In.) ID
Vapor	5/8”	5/8”	3/4”	3/4”	7/8”	7/8”	7/8”
Liquid				3/8”
REFRIGERANT TUBES* (in.)OD
Vapor (0--- 80 Ft Tube Length)	5/8”	5/8”	3/4”	3/4”	7/8”	7/8”	1--- 1/8
Liquid (0--- 80 Ft Tube Length)				3/8”

*For tubing sets between 80 and 200 ft. horizontal or 20 ft. vertical differential, consult the Longline Guideline. Note: See unit Installation Instruction for proper installation.

VAPOR LINE SIZING AND COOLING CAPACITY LOSS 1-STAGE HEAT PUMP APPLICATIONS

LONG LINE APPLICATION: An application is considered ”Long							when outdoor unit is above indoor unit, and 60 ft. (18.29 m) when
line” when the total equivalent tubing length exceeds 80 ft. (24.38							the outdoor unit is below the indoor unit. Refer to Accessory
m) or when there is more than 20 ft. (6.09 m) vertical separation							Usage Guideline below for required accessories. See Longline
between indoor and outdoor units. These applications require							Application Guideline for required piping and system
additional accessories and system modifications for reliable system							modifications. Also, refer to the table below for the acceptable
operation. The maximum allowable total equivalent length is 250							vapor tube diameters based on the total length to minimize the
ft. (76.2 m). The maximum vertical separation is 200 ft. (60.96 m)							cooling capacity loss.
	Acceptable						Cooling Capacity Loss (%)
Unit Nominal						Total Equivalent Line Length ft. (m)
	Vapor Line
		Standard Application					Long Line Application Requires Accessories
Size (Btuh)	Diameters
	(In.) OD	25	50	80	80+		100	125	150	175	200	225	250
		(7.62)	(15.24)	(24.38)	(24.38+)		(30.48)	(38.10)	(45.72)	(53.34)	(60.96)	(68.58)	(76.2)
18,000	5/8	0	1	1	1		2	3	3	4	5	5	6
R---22 HP	3/4	0	0	0	0		0	1	1	1	1	2	2
24,000	5/8	0	1	3	3		3	5	6	7	8	9	10
	3/4	0	0	0	0		1	1	1	2	2	3	3
R---22 HP
	7/8	0	0	0	0		0	0	0	0	1	1	1
30,000	5/8	1	3	5	5		6	8	10	11	13	15	17
	3/4	0	1	1	1		2	3	3	4	5	5	6
R---22 HP
	7/8	0	0	0	0		1	1	1	2	2	2	3
36,000	3/4	0	1	2	2		3	4	5	6	7	8	9
R---22 HP	7/8	0	0	1	1		1	2	2	3	3	4	4
42,000	3/4	1	2	3	3		4	5	7	8	9	10	11
R---22 HP	7/8	0	1	1	1		2	2	3	4	4	5	5
48,000	3/4	1	2	4	4		5	7	8	10	11	13	14
	7/8	0	1	2	2		2	3	4	5	5	6	7
R---22 HP
	1---1/8	0	0	0	0		0	0	1	1	1	1	1
60,000	7/8	1	2	3	3		4	5	7	8	9	10	11
R---22 HP	1---1/8	0	0	1	1		1	1	2	2	2	3	3

Standard Length = 80 ft. (24.38 m) or less total equivalent length

Applications in this area are long line. Accessories are required as shown recommended on Long Line Application Guidelines

Applications in this area may have height restrictions that limit allowable total equivalent length, when outdoor unit is below indoor unit See Long Line Application Guidelines

25HCR3C

3