Carrier installation instructions a30-5032, Dimensions — 30MPA015-045Units

	UNIT	OPERATING	B	C	D	E	NO.OF
		A					F
		WEIGHT (lb)					COMPRESSORS
	30MPA015	17.80	25.10	31.49
		626 (284 kg)	(638 mm)	(800 mm)
		(452 mm)			5.54	6.44	18.50
		17.60	25.20	31.39	(141 mm)	(164 mm)	(470 mm)		FIELD CONNECTION
	30MPA020	635 (288 kg)	(640 mm)	(797 mm)			2
		(447 mm)							(4) 7/8" K.O
	30MPA030	17.00	26.00	30.69	5.87	11.12	17.95
		722 (327 kg)	(660 mm)	(780 mm)	(149 mm)	(282 mm)	(456 mm)
		(432 mm)
	30MPA040	17.50	25.90	33.50
		913 (414 kg)	(658 mm)	(851 mm)
		(445 mm)			5.99	11.00	17.72
					(152 mm)	(279 mm)	3
	30MPA045	17.40	26.00	33.49			(450 mm)
		934 (424 kg)	(660 mm)	(851 mm)					POWER
		(442 mm)								4.03
									ENTRY
								OPTIONAL SOUND ENCLOSURE 48.42 [1230]	040,045 TON	[102]
									ONLY	OPTIONAL SOUND ENCLOSURE	32.12 [816]
								COMPRESSOR
								(SEE TABLE FOR QTY)	OPTIONAL SOUND
									ENCLOSURE
									NON-FUSED
									DISCONNECT
									(OPTIONAL)
									CONTROL BOX
									ACCESS DOOR
									CLEARANCE
									36"(914)
									ENSURE CLEARANCE
									PER LOCAL CODES
	OPTIONAL								CONTROL PANEL
									END OF UNIT
	SOUND
	ENCLOSURE
	65.05
	[1652]
							1/4" FPT
							ACCESS
		IN
3							P,T
							ACCESS	IN			COOLER
							PORTS	COOLER	REMOTE CONDENSER
									CONNECTION
	C						WATER CONNECTIONS
		F					(IN/OUT)
		COOLER				2" VICTAULIC (015-020)
						2 1/2" VICTAULIC (030-045)			LIQ. LINE
							1.75		ISOLATION VALVE
		OUT
							[44]
								OUT
							1/4" SAE
				LIQ. LINE			FLARE RELIEF
	D	E					CONNECTION		B
				SOLENOID
				VALVE				FORK POCKETS
									3.85	A
									[98]
		OPPOSITE CONTROL PANEL END						MOUNTING HOLES 9/16"	MOBILITY KIT	MOUNTING HOLES 9/16"
								52.30	(WHEEL) OPTIONAL
										29.13
								[1328]		[740]
NOTES:								STD UNIT 55.00		STD UNIT 32.00
								[1397]		[813]
1. Operating weight includes weight of water and refrigerant.								OPTIONAL SOUND ENCLOSURE 57.00 [1448]		CONTROL PANEL END
2.	Denotes center of gravity.

3.Dimensions are shown in inches. Dimensions in [ ] are in millimeters.

4.Allow 36-in. (914 mm) clearance on control panel end, opposite control panel end and above the unit. All clearances must be in accordance with local codes.

5.Denotes accessory or factory-installed option.

a30-5032

4.46

[113]

SCROLLING

MARQUEE DISPLAY

62.50

[1588]

4.00[102]

ISOLATOR-OPTIONAL

Fig. 4 — Dimensions — 30MPA015-045 Units