Carrier 48TJ016-028 specifications EconoMiSerlVComponent Locations-- End View

OPTIONAL ECONOMISERIV AND ECONOMISER2 --

See Fig. 32 and 33 for EconoMiSerIV component locations. See Fig. 34 for EconoMi$er2 component locations.

NOTE: These instructions are for installing the optional

EconoMiSerIV and EconoMiSer2 only. Refer to the accessory

EconoMiSerIV or EconoMiSer2 installation instructions when

field installing an EconoMi$erIV or EconoMiSer2 accessory. To complete inst_fllation of the optional EconoMiSerIV. per-

form the following procedure.

1.Remove the EconoMiSerIV hood. Refer to Step 11 -- In-

stall Outdoor-Air Hood on page 14 for information on removing and installing the outdoor-air hood.

2.Relocate outdoor air temperature sensor from shipping

position to operation position on EconoMiSerIV. See Fig. 32.

I theMPORTANT:EconoMiSerIVFailurenot operatingto relocate properlythe sensor. will result in

OUTDOOR AIR

TEMPERATURE SENSOR

SCREWS ECONOMI$ERIV FRAME SCREWS (INSTALLED OPERATION IUb'

POSITION)

LOW TEMPERATURE

COMPRESSOR

LOCKOUT SWITCH

Fig. 32--EconoMiSerlVComponent Locations-- End View

SUPPLY AIR

TEMPERATURE SENSOR

LOCATION

ECONOMI$ERIV

FLANGE

(HIDDEN)

[

Fig. 33 -- EconoMi$erlV Component Locations-

Side View

3.Reinstall economizer hood.

4.Install _dl EconoMiSerIV accessories. EconoMiSerlV wiring is shown in Fig. 35. EconoMi$er2 wiring is shown in Fig. 36.

Outdoor air leakage is shown in Table 9. Return air pressure drop is shown in Table 10.

Table 9 --Outdoor Air Damper Leakage

DAMPER STATIC PRESSURE (in. wg)

0.2 0.4 0.6 0.8 1.0 1.2

LEAKAGE (cfm) 35 53 65 75 90 102

Table 10 --Return Air Pressure Drop (in. wg)

CFM

4500 5000 5400 6000 7200 7500 9000 10,000 11,250

0.040 0.050 0.060 0.070 0.090 0.100 0.110 0.120 0.140

FRAME ECONOMISER2 SCREWS

SCREWS.

	/
i_	u	/J	7
j			N2

Fig. 34- EconoMi$er2 Component Locations

23