I.Operating characteristics:
1.Unit shall operate using refrigerant
2.Unit shall be designed for indoor suspended horizontal mounting and operation.
J.Electrical Requirements
Unit shall have single point power connection to leads in terminal box.
K.Special Features:
Certain standard features are not applicable when the features designated by * are specified. For assis- tance in amending the specifications, your local Carrier Sales Office should be contacted.
*1. Electric Heat Module:
a.Provides encased heater elements that shall attach directly to the base unit discharge.
b.Shall have bottom access.
c.UL listed.
2.Thermostat Assembly:
Provides cooling and fan control. Standard sub- base shall include ‘‘Compressor malfunction light’’ designed to illuminate if compressor lock- out is activated.
3.Time Guard® II Device Compressor Cycle Delay:
Prevents compressor from restarting for a mini- mum of 5 minutes after shutdown.
*4. Condensate Pump:
Unit shall be equipped with remotely located condensate pump. A
* 5. Head Pressure Control Package:
Allows unit to mechanically cool down to 0° F ambient temperature. Package shall include damper operating device and all necessary hardware.
6.Vibration Isolation Package:
Shall provide 4 spring hangers for ceiling mounted unit to damper vibration that may be transmitted to building structure.
15
