Carrier Electric Heater Data, Electric Heater Used with, Branch Circuit Unit 88EN Unit 50AH

Electrical data (cont)

ELECTRIC HEATER DATA

ELECTRIC HEATER	USED WITH	V-PH	CAP. (kW)		BRANCH CIRCUIT
UNIT 88EN	UNIT 50AH	(60 Hz)		Heater Amps	MCA	MOCP (Amps)
0050CA01		240-1	5.0	20.8	26.0	30
0075CA01		240-1	7.5	31.3	39.1	40
0115CA01	024, 036	240-1	11.5	47.9	59.9	60
0075EA01	1-Stage Heat	208-3	5.6	15.6	19.5	20
		240-3	7.6	18.0	22.6	25
1150EA01		208-3	11.3	31.2	39.0	40
		240-3	15.0	36.1	45.1	50
0100EA01		208-3	7.5	20.8	26.0	30
		240-1*	10.0	41.7	52.1	60
		240-3	10.0	24.1	30.1	35
0150EA01		208-3	11.3	31.2	39.0	40
		240-1*	15.0	62.5	78.1	80
		240-3	15.0	36.1	45.1	50
0200EA01		208-3	15.0	41.7	52.1	60
	048, 060	240-1*	20.0	83.3	104.2	110
	2-Stage Heat	240-3	20.0	46.9	58.6	60
0300EA01		208-3	22.5	62.5	78.2	80
		240-3	30.0	72.2	90.2	100
0300CA01		240-1	30.0	124.0	155.0	175
0100FA01		480-3	10.0	12.0	15.0	15
0150FA01		480-3	15.0	18.1	22.6	25
0200FA01		480-3	20.0	24.1	30.1	35
0300FA01		480-3	30.0	36.1	45.1	50

LEGEND

MCA — Minimum Circuit Ampacity

MOCP — Maximum Overcurrent Circuit Protection

(Fuses or Circuit Breaker)

*May be field converted to single-phase units, see electric heat installation instructions. NOTE: Separate power source is required for all heaters. Control from base unit 50AH (24 v).

10