Carrier Access Terminal Server Router Denver Router in Slot, Quick Start Guide, Command

Quick Start Guide

Back-to-Back with Frame Relay

Denver Router in Slot 3

Command

set 3 default disconnect a:1

disconnect 3 set clock1 a:1

set a:1:all type data connect a:1:all 3:1:1 rename 3 "LocalUnit" "Denver"

rename 3 "RemoteUnit" "wan1"

set 3:1 ip address 2.2.2.1 255.255.255.0

add 3 "wan1" static ip network

1.1.1.0255.255.255.0 1 set 3:1:1 encapsulation fr set 3 lmi disable

set 3 "wan1" trunk 1

set 3 "wan1" dlci 101 reset 3

Description

Set Router to default settings

Disconnect all connections to the T1 on the Controller (slot a)

Disconnect all connections to the router in slot 1

Set primary master transmit clock source

Set the T1-1 of the Controller, Type to Data

Connect all of T1-1 to the Router that is in slot 1

Rename the Axxius 800 from "LocalUnit" (default) to "Denver" (LAN)

Rename WAN #1 from "RemoteUnit" (default) to "wan1"

Set the ethernet IP address, in the conventional IP address format. (Router LAN)

Adds a static IP network (route) to the WAN interface

Set the encapsulation on trunk 1 to Frame Relay

Disable LMI (Local Management Interface)

Set the WAN interface named "wan1" to be mapped to trunk 1

Set the DLCI number

Reboot the router, to enable all configurations set

16 Terminal Service Router - Release 1.3