Carrier Access Terminal Server Router Router in Slot, Quick Start Guide, Command, Description

Quick Start Guide

Frame Relay Internet Connection and Public IP Address Routing

Frame Relay Internet Connection and Public IP Address Routing

Router in Slot 1

ISP Router that provides the Internet connection.

Command

set clock1 a:1 set 1 default disconnect a:1

disconnect 1

set a:1:all type data connect a:1:all 1:1:1

rename 1 "LocalUnit" "Boulder"

rename 1 "RemoteUnit" "wan1"

set 1:1 ip address 215.168.21.14 255.255.255.0

add 1 "wan1" static ip network

0.0.0.00.0.0.0 1

set 1:1:1 encapsulation fr set 1 lmi annexd

set 1 "wan1" trunk 1

set 1 "wan1" dlci 101 reset 1

Description

Set primary master transmit clock source

Set Router to default settings

Disconnect all connections to the T1 on the Controller (slot a)

Disconnect all connections to the router in slot 1

Set the T1-1 of the Controller, Type to Data

Connect all of T1-1 to the Router that is in slot 1

Rename the Axxius 800 from "LocalUnit" (default) to "Boulder" (LAN)

Rename WAN #1 from "RemoteUnit" (default) to "wan1"

Set the ethernet IP address, in the conventional IP address format. (Router LAN)

Adds a static IP network (route) to the WAN interface

Set the encapsulation on trunk 1 to Frame Relay

Disable LMI to Annex D

Set the WAN interface named "wan1" to be mapped to trunk 1

Set the DLCI number

Reboot the router, to enable all configurations set

6 Terminal Service Router - Release 1.3