Carrier Access Terminal Server Router Internet Connection using PPP, NAT/PAT and Firewall Filters

Quick Start Guide

Internet Connection using PPP, NAT/PAT and Firewall Filters

Internet Connection using PPP, NAT/PAT and Firewall Filters

Router in Slot 1

ISP Router that provides the Internet connection. Router with NAT/PAT and Firewall Filters.

Command

set clock1 a:1

set 1 default

disconnect a:1

disconnect 1

set a:1:all type data

connect a:1:all 1:1:1

rename 1 "LocalUnit" "Boulder"

rename 1 "RemoteUnit" "wan1"

set 1:1 ip address 192.168.21.14 255.255.255.0

set 1 "wan1" nat enable

set 1 "wan1" nat address 216.174.44.2 1

add 1 "wan1" static ip network

0.0.0.00.0.0.0 1

add 1 "wan1" firewall 1 pass incoming log telnet 192.168.21.14/32 xxx.xxx.xxx.xxx/32

Description

Set primary master transmit clock source

Set Router to default settings

Disconnect all connections to the T1 on the Controller (slot a)

Disconnect all connections to the router in slot 1

Set the T1-1 of the Controller, Type to Data

Connect all of T1-1 to the Router that is in slot 1

Rename the Axxius 800 from "LocalUnit" (default) to "Boulder" (LAN)

Rename WAN #1 from "RemoteUnit" (default) to "wan1"

Set the ethernet IP address, in the conventional IP address format. (Router LAN)

Set the WAN interface named "wan1" enable NAT mapping

Set the WAN interface named "wan1" NAT address

Adds a static IP network (route) to the WAN interface

Adds a Firewall rule to the WAN. Where xxx.xxx.xxx.xxx is the host’s IP address at the far end that will be able to ping or telnet to the router. 0.0.0.0/0 will allow any other host at the far end to ping and/or telnet to the router.

Terminal Service Router - Release 1.3 7