SIREN SWITCH
This momentary
Horn - A simulated
Page 11 of 15
SIREN
The Siren
DIP | DIP | Siren |
|
| with Rotary Selector Switch in Standby |
OFF | OFF | (Default) Produces Horn tone while pressed. |
ON | OFF | Manual control of Mechanical tone. |
|
| Also Mechanical tone continues to fall when Rotary |
|
| Selector Switch is changed from Mechanical position. |
OFF | ON | Manual control of Wail tone. |
ON | ON | Activates Horn Ring Cycler 2 (HRC2) function. |
AUXILIARY INPUT
During installation an auxiliary input may be connected to the horn ring or other switching device. It provides the same operation as pressing the Siren
HORN RING CYCLER 2 (HRC2)
During installation, the auxiliary input must be connected and the HRC2 option selected. While | ||||||||
the siren is in standby, tap the horn ring for different tones. |
|
|
|
|
|
|
| |
See OPTION SWITCHES section for further details. |
|
|
|
|
|
|
| |
RADIO VOLUME ADJUST |
| Radio Volume | ||||||
The radio repeat volume level is set using an adjustment on the side |
| |||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
of the amplifier. Set the Selector Switch to the Radio position and |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| ||
turn on the power. With the radio volume itself set to a normal level, |
|
|
|
|
|
|
| |
set the siren radio volume adjust control to the desired level. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CUTOUT INPUT
During installation, a cutout input may be connected to a door switch. It turns off any siren tone when the door is opened. The siren tone will continue to be cut off even when the door is closed. Changing any switch or input will restore normal function.
08/05/08 | CP5010A |
