Carvin PA620 manual IMPORTANT! for Your PROTECTION, Please Read the Following, Std

This symbol is intended to		This symbol is intend-
	CAUTION
alert the user to the pres-		ed to alert the user to
ence of uninsulated “dan-		the presence of impor-
	RISK OF ELECTRIC SHOCK
gerous voltage” within the		tant operating and
product’s enclosure that may be of suf-	DO NOT OPEN	maintenance (servicing) instructions
ficient magnitude to constitute a risk of		in the literature accompanying the
electric shock to persons.		appliance.

IMPORTANT! FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:

WATER AND MOISTURE: Appliance should not be used near water (near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

POWER SOURCES: The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polar- ization means of an appliance is not defeated.

POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

SERVICING: The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

FUSING: If your unit is equipped with a fuse receptacle, replace only with the same type fuse. Refer to replacement text on the unit for correct fuse type.

SAFETY INSTRUCTIONS (EUROPEAN)

The conductors in the AC power cord are colored in accordance with the following code.

GREEN & YELLOW—Earth BLUE—Neutral BROWN—Live

U.K. MAIN PLUG WARNING: A molded main plug that has been cut off from the cord is unsafe. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAM-

AGED OR CUT MAIN PLUG INTO A POWER SOCKET.

LIMITED WARRANTY

Your Carvin product is guaranteed against failure for 1 YEAR unless otherwise stated. Carvin will service and supply all parts at no charge to the customer providing the unit is under warranty. Shipping costs are the responsibility of the customer. CARVIN DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility for horn drivers or speakers damaged by this unit. This warranty does not cover, and no liability is assumed, for damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other warranties, expressed or implied. No representative or person is authorized to represent or assume for Carvin any liability in connection with the sale or servicing of Carvin products. CARVIN SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

When RETURNING merchandise to the factory, you may call for a return authorization number. Describe in writing each problem. If your unit is out of warranty, you will be charged the current FLAT RATE for parts and labor to bring your unit up to factory spec- ifications.

MAINTAINING YOUR EQUIPMENT

Avoid spilling liquids or allowing any other foreign matter inside the unit. The panel of your unit can be wiped from time to time with a dry or slightly damp cloth in order to remove dust and bring back the new look. As with all pro gear, avoid prolonged use in caustic environments (salt air). When used in such an environment, be sure the mixer is adequately protected by a cover.

REPLACEMENT PARTS LIST (for circuit cards)

D6

03-50135

1

EACH

STANDOFF LED .500 X .135 T1

“R111, R131, R133, R136, R150, R158,”

D7

03-50135

1

EACH

STANDOFF LED .500 X .135 T1

“C2, C5, C16, C19, C20, C21,”

58-10035

15

EACH

1K SMT .25W 1206 1%

49-22035

58

EACH

SMT CAP 22uF 35v ELECTROLITIC

“R187, R190, R191”

S1

06-40040

4

EACH

TERMINAL VERT FEML PC MTG .250

“C22, C26, C29, C31, C34, C56,”

58-10035

15

EACH

1K SMT .25W 1206 1%

49-22035

58

EACH

SMT CAP 22uF 35v ELECTROLITIC

“R1, R4, R28, R29, R30,”

QC5

06-40050

1

EACH

TERMINAL VERT MALE PC MTG .250

“C59, C62, C63, C64, C66, C67,”

49-22035

58

EACH

SMT CAP 22uF 35v ELECTROLITIC

58-10045

39

EACH

10K

SMT .25W 1206 1%

QC1

06-40060

2

EACH

TERMINAL 90dg MALE PC MTG .250

“C68, C93, C103, C104, C105, C108,”

“R31, R35, R36, R37, R39,”

QC2

06-40060

2

EACH

TERMINAL 90dg MALE PC MTG .250

49-22035

58

EACH

SMT CAP 22uF 35v ELECTROLITIC

58-10045

39

EACH

10K

SMT .25W 1206 1%

“C110, C114, C153, C154,”

“R83, R116,”

58-10045

J11

21-40000

6

EACH

XLR FEML CON NEUTRIK #NC3FAV-0

49-22035

58

EACH

SMT CAP 22uF 35v ELECTROLITIC

39 EACH 10K SMT .25W 1206 1%

J21

21-40000

6

EACH

XLR FEML CON NEUTRIK #NC3FAV-0

“C203, C204, C205, C208, C210, C214,”

“R120, R121, R123, R139,”

J31

21-40000

6

EACH

XLR FEML CON NEUTRIK #NC3FAV-0

49-22035

58

EACH

SMT CAP 22uF 35v ELECTROLITIC

58-10045

39

EACH

10K

SMT .25W 1206 1%

J41

21-40000

6

EACH

XLR FEML CON NEUTRIK #NC3FAV-0

“C303, C304, C305, C308, C310, C314,”

“R152, R153, R154, R156, R159, R160,”

J51

21-40000

6

EACH

XLR FEML CON NEUTRIK #NC3FAV-0

49-22035

58

EACH

SMT CAP 22uF 35v ELECTROLITIC

58-10045

39

EACH

10K

SMT .25W 1206 1%

J61

21-40000

6

EACH

XLR FEML CON NEUTRIK #NC3FAV-0

“C403, C404, C405, C408, C410, C414,”

“R167, R170, R175, R176, R193,”

49-22035

58

EACH

SMT CAP 22uF 35v ELECTROLITIC

58-10045

39

EACH

10K

SMT .25W 1206 1%

J5

21-40022

1

EACH

JACK RCA QUAD PC VERTICAL MTG

“C503, C504, C505, C508, C510, C514,”

“R198, R199, R216, R223, R316,”

49-22035

58

EACH

SMT CAP 22uF 35v ELECTROLITIC

58-10045

39

EACH

10K

SMT .25W 1206 1%

J1

21-50345

“11

EACH

JACK .250”” PHONE MONO PCB MTG”

“C603, C604, C605, C608, C610, C614,”

“R323, R416, R423,”

J2

21-50345

“11

EACH

JACK .250”” PHONE MONO PCB MTG”

49-22035

58

EACH

SMT CAP 22uF 35v ELECTROLITIC

58-10045

39

EACH

10K

SMT .25W 1206 1%

J3

21-50345

“11 EACH JACK .250”” PHONE MONO PCB MTG”

“R516, R523, R616, R623”

J4

21-50345

“11

EACH

JACK .250”” PHONE MONO PCB MTG”

“C72, C122, C124, C135”

58-10045

39

EACH

10K

SMT .25W 1206 1%

J6

21-50345

“11 EACH

JACK .250”” PHONE MONO PCB MTG”

49-22212

4 EACH

0.0022UF SMT 10% FILM 0805 50V

“R52, R61, R71, R100, R134, R135, R138”

J12

21-50345

“11

EACH

JACK .250”” PHONE MONO PCB MTG”

J22

21-50345

“11

EACH

JACK .250”” PHONE MONO PCB MTG”

“C50, C112, C134, C212, C312, C412, C512, C612”

58-10055

7 EACH 100K SMT .25W 1206 1%

J32

21-50345

“11 EACH

JACK .250”” PHONE MONO PCB MTG”

49-22312

8 EACH

0.022UF SMT 10% FILM 0805 50V

“R92, R94, R144”

58-10065

J42

21-50345

“11 EACH JACK .250”” PHONE MONO PCB MTG”

J52

21-50345

“11

EACH

JACK .250”” PHONE MONO PCB MTG”

“C8, C9”

49-25152

3 EACH 1M SMT .25W 1206

1%

J62

21-50345

“11 EACH JACK .250”” PHONE MONO PCB MTG”

2 EACH 220PF SMT 5% CERAMIC 0805

“R112, R115, R212, R215, R312, R315,”

F1

23-03529

2

EACH

FUSEHOLDER CLIPS 3AG VERT MTG

“C8, C9”

58-15035

12

EACH

1.5K SMT .25W 1206 1%

“H2, H4, H5, H6, H7, H8”

“C1, C36, C37, C106, C107,”

“R412, R415, R512, R515, R612, R615”

58-15035

12

EACH

1.5K SMT .25W 1206 1%

23-11004

6

EACH CONNECT HEADER 4 PIN STRAIGHT

49-27052

16

EACH 27 PF SMT 5% CERAMIC 0805

“R38, R105, R125, R205,”

“C206, C207, C209, C306, C307,”

“H1, H10, H11, H12”

49-27052

16

EACH

27 PF SMT 5% CERAMIC 0805

58-15045

8 EACH 15K SMT .25W 1206 1%

23-11008

4

EACH

CONNECT HEADER 8 PIN STRAIGHT

“C406, C407, C506, C507, C606, C607”

“R305, R405, R505, R605”

“H13, H14”

23-11010

49-27052

16

EACH 27 PF SMT 5% CERAMIC 0805

58-15045

8 EACH 15K SMT .25W 1206 1%

“R2, R8, R41, R44,”

2 EACH CONNECT HEADER 10 PIN STRAIGHT

C55

49-33152

1

EACH

330PF SMT 5% CERAMIC 0805

H9

23-15605

“1

EACH

CONNECT HEADER .156”” 5 PIN”

C47

49-33212

1

EACH

0.0033UF SMT 10% FILM 0805 50

58-15055

8 EACH 150K SMT .25W 1206 1%

“R54, R65, R67, R79”

H3

23-40008

1

EACH

CONNECT HEADER .400 IN 8 PIN

“C38, C48”

49-33312

58-15055

8 EACH 150K SMT .25W 1206 1%

“R76, R130, R137”58-22025

2 EACH 0.033UF SMT 10% FILM 0805 50V

H3 middle pins

23-92995

3 EACH 220.5 SMT .25W 1206 1%

2 EACH SHUNT JUMPER UNPLATED

“C17, C18, C23, C25, C28, C33,”

“R21, R27, R32, R47, R53, R55, R56,”

49-39052

24

EACH 39PF SMT 5% CERAMIC 0805

“S4, S11, S21, S31, S41, S51, S61”

“C69, C82, C87, C90, C100, C109,”

58-22035

36

EACH

2.2K SMT .25W 1206 1%

25-02201-

1

*

STD

7 EACH ASSEMBLED

49-39052

24

EACH

39PF SMT 5% CERAMIC 0805

“R62, R64, R68, R72, R74, R95, R97,”

SWITCH AND CAP

“C113, C118, C119, C213, C309, C313,”

58-22035

36

EACH

2.2K SMT .25W 1206 1%

49-39052

24

EACH 39PF SMT 5% CERAMIC 0805

“R103, R104, R124, R142, R155, R157,”

AA

30-62004

1

EACH

PCB CARD SYS MSTR PA620/410

“C409, C413, C509, C513, C609, C613”

58-22035

36

EACH

2.2K SMT .25W 1206 1%

49-39052

24

EACH

39PF SMT 5% CERAMIC 0805

“R169, R203, R204, R303, R304,”

“C58, C98”

42-47251-

58-22035

36

EACH

2.2K SMT .25W 1206 1%

“1

* STD

2

EACH CAP ELEC 4,700 MFD 50V 20%”

“C45, C52, C54”

49-47212

“R403, R404, R503, R504, R603, R604,”

3 EACH 0.0047uF SMT FILM 0805 50V

58-22035

36

EACH

2.2K SMT .25W 1206 1%

C150 or C250

46-22461

“R117, R217, R317, R417, R517, R617”

1 EACH CAP MYLR .2200UF

63VOLT 10%

“C32, C46, C73”

49-47312

58-22035

36

EACH

2.2K SMT .25W 1206 1%

“C14, C15, C61, C70, C84, C85, C94”

2 EACH 0.047UF SMT 10% FILM 0805 50V

“R5, R10, R11, R12, R14,”

47-10225

“7

EACH

CAP ELEC 1,000 MFD 25V 20%”

“C30, C41, C101, C102, C201, C202, C301,”

58-22045

41

EACH

22K

SMT .25W 1206 1%

49-82052

14

EACH 82PF SMT 5% CERAMIC 0805

“R15, R16, R18, R19, R23,”

“C49, C51, C53, C71, C111, C117, C123, C211, C223, C311, C323,

“C302, C401, C402, C501, C502, C601, C602”

58-22045

41

EACH

22K

SMT .25W 1206 1%

C411, C423, C511, C523, C611, C623”

49-82052

14

EACH

82PF SMT 5% CERAMIC 0805

“R24, R25, R26, R33,”

49-10212

17

EACH

0.001UF SMT 10% FILM 0805 50V

58-22045

41

EACH

22K

SMT .25W 1206 1%

“R222, R224”

58-92201

“R108, R109, R113, R126, R127, R129,”

“C27, C40, C43, C57, C95”

2 EACH 22 SMT 1W 2512 20%

58-22045

41

EACH

22K

SMT .25W 1206 1%

49-10312

5

EACH

0.01UF SMT 10% FILM 080550V

“R132, R137, R140, R141, R148, R149, R163,”

“R59, R60, R89, R128”

58-22045

41

EACH

22K

SMT .25W 1206 1%

“C3, C4, C7, C10, C11, C12,”

55-03300

4

EACH

RES .33 OHM 5W 5% SB VERT

“R208, R209, R213, R308, R309, R313,”

49-10412

23 EACH 0.1UF

SMT 5% CERAMIC 0805

58-22045

41

EACH

22K

SMT .25W 1206 1%

“C13, C24, C35, C39, C60, C65,”

R196 58-00035

1

EACH

0.0 SMT JUMPER 1206

“R408, R409, R413, R508, R509, R513,”

49-10412

23 EACH 0.1UF

SMT 5% CERAMIC 0805

58-22045

41

EACH

22K

SMT .25W 1206 1%

“C74, C75, C76, C77, C78, C79,”

“R85, R91, R165, R171, R172, R188, R189”

“R608, R609, R613”

49-10412

23 EACH 0.1UF

SMT 5% CERAMIC 0805

58-10015

7 EACH 10.5 SMT .25W 1206 1%

58-22045

41

EACH

22K

SMT .25W 1206 1%

“C80, C142, C151, C152, C155”

49-10412

23 EACH 0.1UF

SMT 5% CERAMIC 0805

R40

58-10025

1 EACH 100.5 SMT .25W 1206 1%

“C42, C44, C99”

49-10451

“R48, R66, R78, R81, R86, R99,”

“R20, R22, R63, R69, R73, R75”

3 EACH 0.1 uF SMT 10% FILM 1206 50V

58-10035

15

EACH 1K SMT .25W 1206 1%

58-22055

6 EACH 220K SMT .25W 1206 1%

CAUTION						REFER SERVICING TO QUALIFIED SERVICE
						PERSONNEL! THIS UNIT CONTAINS HIGH
RISK OF ELECTRIC SHOCK						VOLTAGE INSIDE!
							D1	60-75330	1 EACH LED GREEN DIFFUSED 3MM T-1.00
“R50, R90”		58-27025					D2	60-75340	1 EACH LED YELLOW DIFFUSED 3MM T-1.00
2 EACH 270.5 SMT .25W 1206 1%							Q27	60-78050	1 EACH REGULATOR VOLTAGE 5 +V 1 AMP
“R77, R82, R161, R162, R177, R178, R233”							Q14	62-04391	1 EACH TRANSISTOR SMT MMBF4391LT1
							“Z1, Z2, Z3, Z4, Z11, Z12, Z13”
58-33025		7	EACH	330.5 SMT .25W 1206 1%
“R70, R106, R107, R168, R206,”							62-04739		7 EACH SMT DIODE ZENER 4739
							“D15, D16, D17, D18, D35, D36”
58-33035		14	EACH	3.3K SMT .25W 1206 1%
“R207, R306, R307, R406, R407,”							62-06001		6 EACH DIODE ULTRA FAST 600V 1A SMA
58-33035		14 EACH		3.3K SMT .25W 1206 1%
“R506, R507, R606, R607”							U1	62-07712	1 EACH IC DSP W/CODEC AKM7712
58-33035		14 EACH		3.3K SMT .25W 1206 1%			Y1	62-16400	1 EACH CRYSTAL CERAMIC SMT 16.4mHz
“R3, R9, R34, R145”
							“D3, D4, D5, D7, D8, D9,”
58-33045		*	STD	4 EACH 33K SMT .25W 1206 1%
							62-19140		11 EACH 1N914 HI SPD SMT 250mW DIODE
“R48, R58, R88, R200”							“D10, D11, D12, D13, D14”
58-47015		4 EACH 47.5 SMT .25W 1206 1%					62-19140		11 EACH 1N914 HI SPD SMT 250mW DIODE
“R42, R43, R45, R80, R93, R98, R146”							“A10, A11, A21, A31, A41, A51, A61”
58-47025		7	EACH	470.5 SMT .25W 1206 1%			62-20430		7 EACH NJM2043SMT(TESTED) DUAL HFREQ
“R6, R13, R17, R84,”							“A1, A2, A3, A4, A5, A7,”
58-47035		22 EACH 4.7K SMT .25W 1206 1%					62-45650		16 EACH NJM4565 SMT DUAL HI FREQ
“R110, R118, R119, R210, R218, R219,”							“A8, A9, A12, A15, A16,”
58-47035		22 EACH		4.7K SMT .25W 1206 1%			62-45650		16 EACH NJM4565 SMT DUAL HI FREQ
“R310, R318, R319, R410, R418, R419,”							“A22, A32, A42, A52, A62”
58-47035		22 EACH 4.7K SMT .25W 1206 1%					62-45650		16 EACH NJM4565 SMT DUAL HI FREQ
“R510, R518, R519, R610, R618, R619”							“Q3, Q4, Q5, Q6, Q9, Q10, Q13, Q16, Q17, Q18, Q21, Q24”
58-47035		22 EACH		4.7K SMT .25W 1206 1%
“R46, R57, R87, R96, R114,”							62-54001		12 EACH MMBT5401LTI PNP SOT-23 SMT
							“Q7, Q8, Q19, Q20”
58-47045		13	EACH	47K SMT .25W 1206 1%
“R147, R164, R166, R214”							62-55500		4 EACH MMBT5550 NPN SOT-23
							U2	62-87764	1 EACH MICRO CONTROLLER SOIC PACKAGE
58-47045		13 EACH 47K SMT .25W 1206 1%
“R314, R414, R514, R614”							“K1, K2”		70-05713
58-47045		13 EACH 47K SMT .25W 1206 1%					2 EACH RELAY SPDT 12A@120VAC/24V COIL
R92	58-47055	1 EACH 470K SMT .25W 1206 1%					F1	70-21050	1 EACH FUSE ABC 5.00A FAST 6.35X32MM
R7	58-56025	1	EACH	560.5 SMT	.25W 1206 1%		“P11, P13, P21, P23, P31, P33,”
“R101, R102, R201, R202, R301, R302,”							71-09252		“12 EACH	POT 9 “”D-P”” 25F B50K-CC”
							“P41, P43, P51, P53, P61, P63”
58-56035		12 EACH		5.6K SMT .25W 1206 1%			71-09252		“12 EACH	POT 9 “”D-P”” 25F B50K-CC”
“R401, R402, R501, R502, R601, R602”							“P1, P2, P3, P8, P9, P10,”
58-56035		12	EACH	5.6K SMT .25W 1206 1%
“R173, R174, R192, R193, R194, R195”							71-09253		“24 EACH	POT 9 “”D-P”” 25F B50K-”
							“P14, P16, P17, P24, P26, P27,”
58-68015		6	EACH	68.5 SMT .25W 1206 1%			71-09253		“24 EACH	POT 9 “”D-P”” 25F B50K-”
							“P34, P36, P37, P44, P46, P47,”
“R49, R51, R151”		58-68025					71-09253		“24 EACH	POT 9 “”D-P”” 25F B50K-”
3 EACH 680 SMT		.25W 1206 1%					“P54, P56, P57, P64, P66, P67”
R122 58-68035		1 EACH 6.8K SMT .25W 1206 1%					71-09253		“24 EACH	POT 9 “”D-P”” 25F B50K-”
							“P72, P73, P74, P75, P76, P77, P78”
“R142, R143”		58-91025					71-10320		7 EACH FADER 20MM SL20V3-B10K-L15D(G)
2 EACH 910.5 SMT .25W 1206 1%
“Q32, Q34”		60-00142
2 EACH TRANS NPN TIP142 TO-218
“Q31, Q33”		60-00147
2 EACH TRANS PNP TIP147 TO-218
“D31, D32, D33, D34”
60-50200		4 EACH DIODE GEN REC 1N5402 3A 200V
“Q2, Q11, Q23, Q25”
60-55500-		1		* STD		4 EACH TRANS 2N5550
HV NPN 250V T0-92
U3	60-71024	1 EACH CMOS STATIC RAM 1MEG 20NS
D6	60-75320	1	EACH	LED RED DIFFUSED 3MM T-1.00