CARVIN ENGINEERING DATA PA410/PA620 POWERED MIXERS | OPERATING MANUAL |
PA620
Congratulations on your purchase of the PA410 or PA620 mixer! These mixers are the culmination of Carvin’s 50 years of knowledge and experience in the pro sound arena. The quality and features included in these powerful little units make them rev- olutionary and unheard of in their price range! Please take the time to review this manual so that you may fully enjoy all the benefits your mixer has to offer.
PRO FEATURES
The PA series mixers give you pro XLR mic preamps, along with 1/4" line inputs on every channel. Phantom power is provided on the XLR inputs for compatibility with high quality condenser mics. Each channel also provides a MONITOR send, a GAIN switch for accom- modating low and high input signals, EFFECTS send and LEVEL control.
ACTIVE EQ
Each channel of the PA series provides a HI and LOW shelving EQ with ±12dB of adjust- ment range featuring an internally optimized midrange circuit, for easy, effective tone adjustments that sound great for vocals.
BUILT-IN POWER AMPS
The amplifiers in the PA series mixers are powerful enough to easily drive your speakers for excellent coverage and clean, punchy sound. The PA410 delivers 100 Watts RMS, while the more powerful PA620 delivers 200 Watts RMS! (Note: Each model is designed to be used with 8Ω speakers (not 4 Ω ). If the relay protection engages after 20 minutes of heavy use (no output from the mixer while the power LED is on), you are using 4Ω speakers. If the mixer goes into protect, let the mixer cool down and it will reset).
24-BIT DIGITAL PROCESSOR
Perhaps the most incredible feature of the PA series mixer is the
MASTER SECTION
The master section of the PA series provides a MAIN volume for controlling your
CONNECTIVITY
The PA series mixers allow easy connections to most related equipment. There is a 1/4" MAIN LINE OUT for sending the main signal to an external power amp or for plugging in headphones. The MONITOR OUT is a 1/4" jack for feeding an external monitor amplifier. RCA TAPE IN and OUT are provided for easy connection to keyboards, tape decks, CD players, MiniDisc, computers, etc. The EFFECTS FOOT SW jack allows the connection of the optional FS22 or equivalent footswitch for turning on or off your effects during per- formances. Two 1/4" SPEAKER jacks provide quick, easy connection for two 8 Ohm speakers.
CONSTRUCTION
Solid plywood construction,
RECEIVING INSPECTION—read before getting started
INSPECT YOUR MIXER FOR ANY DAMAGE which may have occurred during shipping.
If any damage is found, please notify the shipping company and CARVIN immediately. SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to
SAVE YOUR INVOICE. It will be required for warranty service if needed in the future. SHIPMENT SHORTAGE. If you find items missing, they may have been shipped sepa-
rately. Please allow several days for the rest of your order to arrive before inquiring. RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this man-
ual for your records. Keep your portion of the card and return the portion with your name and comments to us or register online at www.carvin.com/registration
For your records, you may wish to record the following information.
Serial No._____________________ Invoice Date_______________
PA410 / PA620 SPECIFICATIONS:
Frequency Response: | |
Total Harmonic Distortion: Less than 1% | |
Equivalent Input Noise: | 150 ohm source: |
PA410 / PA620 BLOCK DIAGRAM |
| ||||
20dB |
|
|
|
| MAIN MON EFF |
GAIN SWITCH |
|
|
|
|
|
MIC | TWO BAND |
|
|
| |
CHANNEL TONE |
|
|
| ||
PRE |
|
|
| ||
| CONTROLS |
|
|
| |
PAD |
|
|
|
| TAPE OUT |
line pad |
|
|
|
|
|
|
|
|
|
| |
|
|
| CHANNEL |
| SEVEN BAND |
| HI | LOW | LEVEL | CHANNEL | GRAPHIC |
|
|
|
| EFF SND | EQUALIZER |
|
|
| CHANNEL | MAIN | |
|
|
| SUMMING AMP | ||
CHANNEL |
|
| MONITOR | AND LEVEL | |
|
| LEVEL |
|
| |
|
|
|
|
| MONITOR |
|
|
|
|
| LINE OUT |
| RETURN FOR |
|
| DSP TO | MONITOR |
| INTERNAL DSP |
| MONITOR | SUMMING AMP | |
|
|
|
|
| AND LEVEL |
DSP RETURN |
|
|
LEVEL | GAIN |
|
| REDUCTION |
|
| FOR DSP | INTERNAL |
|
| |
TAPE TO | EFFECTS | DSP SEND |
| ||
MONITOR | SUMMING AMP |
|
TAPE INPUT |
|
|
TAPE INPUT |
|
|
LEVEL |
|
|
MAIN
LINE OUT
TO INTERNAL POWER AMP
Output Noise: | |
| (all levels minimum) |
Output Power: | PA410 4Ω : 100 watts RMS |
| PA620 4Ω : 200 watts RMS |
Output Headroom: | +20dB 1/4” unbalanced |
Maximum Gain: | Mic in to Master Line Out: 65dB |
Crosstalk: | Adjacent ch’s: |
Common Mode Rejection: | |
Phantom Power: | All XLR Mic in channels |
Channel EQ.: | HI: 12KHz ±15dB |
| LOW: 85Hz ±15dB |
Graphic EQ.: | 7 Band Oct. Intervals ±12dB |
| 100, 250, 1k, 2.5k, 5k, 10k |
Mic Input: | Balanced XLR input |
Line Input: | Unbalanced 1/4” Phone Jack |
Power Requirements: | PA410 120 or 240 VAC - 110VA |
| PA620 120 or 240 VAC - 220VA |
Size: | 16”W x8”D x 8.25”H |
Weight: | PA410: 15lbs., PA620: 18lbs |
Options: | FS22 Footswitch, CV620 cover |
12340 World Trade Drive, San Diego, CA 92128 | |
800.854.2235 www.carvin.com |
