IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside. Please refer to qualified personnel for service.

ALERT: The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the component.

1.READ ALL INSTRUCTIONS: All the safety and operating instructions of your Cary Audio equipment should be read before power is applied to the equipment.

2.RETAIN OWNER'S MANUAL: These safety and operating instructions should be retained for future reference.

3.HEED WARNING: All warnings on the unit and in the operating instructions should be adhered to.

4.FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.

5.CLEANING: Unplug the unit from the wall outlet before cleaning. The unit should be cleaned only as recommended by the manufacturer.

6.ATTACHMENTS: Do not use attachments not recommended by the unit manufacturer as they may cause hazards.

7.WATER AND MOISTURE: Do not use the unit near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool.

8.ACCESSORIES: Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child, an adult, or damage to the unit. Mounting of the unit should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.

9.VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. The top or bottom panel openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. The unit should not be installed in a built-in location such as a bookcase or rack unless proper ventilation is provided. There should be free space of at least 6 inches (16cm) above the unit and an opening behind the unit.

10.GROUNDING OR POLARIZATION: The unit may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug should fail to fit, contact a licensed electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

11.POWER SOURCES: The unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your unit dealer or local power company.

12.POWER CORD PROTECTION: Power supply cords should be routed so that they are unlikely to be walked on or pinched by items placed on or against them. Pay close attention to cords where they enter a plug, or a convenience receptacle, and the point where they exit from the unit.

13.OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, NSI/NFPA 70, provides information regarding proper grounding of the mast and supporting structure, grounding of the lead-in wire to an Antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Page 2 Page 4
Page 3
Image 3
Cary Audio Design A 306 owner manual Important Safety Instructions
Page 2 Page 4

A 306 specifications

The Cary Audio Design A 306 is a standout power amplifier that exemplifies the brand's commitment to producing high-performance audio equipment. Designed for both audiophiles and casual listeners, the A 306 brings a wealth of features and technologies that enhance sound quality and user experience.

One of the notable characteristics of the A 306 is its robust power output. Delivering 300 watts per channel into 8 ohms and 600 watts into 4 ohms, it provides ample power to drive a wide range of speakers, effortlessly filling any room with rich, dynamic sound. This amplification capability ensures that listeners can enjoy their favorite music with clarity and precision, irrespective of volume levels.

The A 306 uses a Class A/B design, known for its efficiency and thermal management. This allows the amplifier to maintain high audio fidelity while reducing distortion levels. The result is an engaging listening experience, where details and nuances are preserved, providing a sense of realism that is often missing in lesser amplifiers.

Incorporating advanced technologies, the A 306 features a dual-monoblock architecture, ensuring that each channel operates independently. This design minimizes crosstalk, enhancing stereo imaging and producing a more defined soundstage. The use of high-quality components extends to transformers and capacitors, contributing to the overall performance of the amplifier.

Another key aspect of the A 306 is its flexible connectivity options. It comes equipped with balanced XLR inputs, as well as unbalanced RCA inputs, allowing users to integrate the amplifier seamlessly into various audio setups. The inclusion of a high-end binding post output ensures solid speaker connections, enabling the best possible signal transfer.

The A 306 is aesthetically pleasing, featuring a sleek chassis with a modern finish. The user-friendly interface includes easy-to-read indicators and durable controls, making operation straightforward.

In summary, the Cary Audio Design A 306 is a powerful, sophisticated amplifier that offers audiophiles a range of features designed to enhance their listening experience. Its Class A/B design, dual-monoblock architecture, and high-quality components work in harmony to deliver remarkable sound quality, making it an excellent choice for anyone looking to elevate their audio system.
Top Page Image Contents