Casablanca Fan Company 32xxA owner manual Intelitouch Operation Safe-Exit Program, InteliTouch

Inteli•Touch®

INTELI•TOUCH OPERATION LIGHT-MINDER PROGRAM

The Light-Minder program automatically turns OFF the fan mounted lights after two hours.

To enter the Light-Minder Program:

1.Turn the POWERPOWER OFF for at least three seconds.

2.Turn the POWER on.

3.Immediately operate the buttons in the following sequence:

+ + LIGHT + LIGHTFAN FAN

4. A series of tones indicates this command has been accepted.

The fan and light will operate normally using the buttons to turn them on and off. But, if the lights are left on, they will automatically shut off after two hours. To cancel the Light-Minder Program, turn the POWER off for three seconds.

INTELI•TOUCH OPERATION SAFE-EXIT PROGRAM

The Safe-Exit Program gives you about thirty seconds of light when you turn the lights off, enabling you to exit your home before the lights go out.

To enter the Safe-Exit Program:

1. Turn the POWEPOWER off for at least three seconds.

2. Turn the POWEPOWER on.

3. Immediately operate the buttons in the following sequence:

FAN + FAN + LIGHT + LIGHT

After you hear the confirming audio

tones from the fan - immediately press LIGHT

4. The lights will blink to indicate this command has been accepted.

The lights will stay on for twenty seconds and then begin to dim. After a total of thirty seconds has elapsed, the lights will be off completely. To cancel the Safe-Exit Program, turn the POWEPOWER off for three seconds.

Note: Both Light-Minder and Safe-Exit programs can run at the same time, however the dimmer cannot be used, the light may only be turned ON/OFF.

INTELI•TOUCH OPERATION HOME-SAFE®PROGRAM

The Home-Safe Program makes an unoccupied home appear occupied by turning the lights on and off at random times.

To enter the Home-Safe Program:

1. Turn the POWPOWER off for at least three seconds.

2. Turn the POWPOWER on.

3. Immediately operate the buttons in the following sequence:

LIGHT + FAN + LIGHT + FAN

4. A tone and flashing light indicate this command has been accepted.

This program overrides all manual control of lights and fan. The lights will now be automatically cycled on and off in a controlled sequence as follows: On 1 hour, off 1/2 hour, on 2 hours, off 1 hour, on 1/2 hour then off 2 hours.

This seven hour pattern will repeat continuously so that a different pattern of lighting is seen each day of the week. 

To cancel the Home-Safe Program, turn the POWEPOWER off for three seconds.

INTELI•TOUCH OPERATION FAN-MINDER®PROGRAM

The Fan-Minder feature will add to your comfort when used in the bedroom. The program reduces the speed of the fan each two-hour interval to compensate for the cooling night air.

To enter the Fan-Minder Program:

1. Turn the POWEPOWER off for at least three seconds.

2. Turn the POWEPOWER on.

3. Immediately operate the buttons in the following sequence:

LIGHT + LIGHT + FAN + FAN

4.The fan controller will respond with three descending tones. A timer is now initiated and the fan will reduce one speed for each two-hour interval. The fan will not, however, descend below the second lowest speed.

To cancel the Fan-Minder Program, turn the POWEPOWER off for three seconds. You may increase the fan speed by pressing and holding the FAN button until the desired speed is reached, then release it. The fan will again reduce one speed for each 2 hour interval.

10