CAPISTRANO
BLADE INSTALLATION
Step 10. Attach each blade to a blade holder securing it with the four blade screws provided.
Using the screwdriver, tighten securely by hand only.
BLADE SCREW (4 PER BLADE)
BLADE
BLADE
HOLDER
REMOVE SHIPPING BLOCKS
Step 11. On the flywheel remove the five shipping blocks by unscrewing the screws. Set these screws aside for installing the blades in Step 12.
Discard the five shipping blocks.
Note: Save these five screws, they will be used in Step 12!
SHIPPING
BLOCKS
BLADE/BLADE HOLDER INSTALLATION
Step 12. Using the five screws removed in Step 11, and the five additional screws from
the pack, attach each blade/blade holder as- sembly to the motor.
Using the screwdriver, tighten securely by hand only.
7