CAPISTRANO
INSTALLING THE SWITCH HOUSING ASSEMBLY
Step 15. Line up the two inner clear- ance holes in the cap with the two threaded holes in the switch mounting plate standoffs.
CAUTION! Before continuing to the next step check that a wire or com- ponent inside the switch housing will not be pinched as it is installed.
Step 16. Use the two (2)
Tighten securely by hand only.
SWITCH HOUSING
MOUNT SCREW
(2)
INSTALLING THE CAP
Step 17. Line up the two clearance holes in the cap with the two threaded holes on the raised rim of the switch housing. Press the cap onto the switch housing to seat the guide pins into the alignment holes of the switch housing.
Step 18. Using the two (2)
Tighten securely by hand only.
CAP SCREW
(2)
9