Casablanca Fan Company 46U26D, 46U73M Speed Operation, Speed Optional Light Fixture Installation

3-SPEED ♦OPERATION

Pull-chain switches on the fan control the fan and lights. Using the fan control pull-chain switch: Fan off at start.

First pull: fan ON, low speed

Second pull: medium speed

Third pull: high speed

Fourth pull: fan OFF

Using the optional light pull-chain switch: Light off at start. First pull: light ON

Second pull: light OFF

Direction of blade rotation is controlled by the reverse slide switch on the side of the switch housing.

No changes in household wiring are required.

FAN & SPEED

CONTROL

PULL CHAIN SWITCH

REVERSE

SWITCH

3-SPEED ♦OPTIONAL LIGHT FIXTURE INSTALLATION

NOTE: If a separate circuit is used to control the lights from a wall control, the BLUE D1-Option wire in the canopy should be connected to that switch leg with the BLACK fan power wire.

1.	Refer to light kit instructions to assemble and attach your light	SWITCH
		HOUSING
	kit correctly.	COLLAR
2.	Remove the two 8-32 screws from the switch housing cap.
3.	Remove the plug from switch housing.
4.	Install pull-chain switch and finger tighten collar on switch.
5.	Connect one wire from pull-chain switch to the BLUE D1-Option
	wire. Secure splice with a wire nut.
6.	Connect other wire from pull-chain switch to BLACK wire from
	light kit. Secure splice with a wire nut.
7.	Connect WHITE wire from switch housing to WHITE wire from light
	kit. Secure splice with a wire nut.
8.	At the canopy, connect the BLACK and BLUE wires.

3-SPEED ♦ OPTIONAL WALL CONTROL

The W-4/W-411 wall control provides four-speed control of fan from a convenient wall location. The W-4 is designed to replace a standard wall switch and will fit wall boxes with a depth of 2" or greater. Not for use with single pull-chain fan/light option wiring.

To install a W-4/W-411 wall control in place of an existing wall switch, follow the instruc- tions on the W-4/W-411 package.

Note: No rewiring is required if the fan is replacing an existing light fixture.

Operation of the fan from the wall switch is simple: 1. Turn knob to obtain desired speed setting.

CAUTION! Failure to set the pull-chain speed to HIGH can result in faulty operation of the fan and damage to the W-4/W-411 wall control. To confirm fan is set to HIGH: Turn W-4/W-411 fan speed switch to 'HI'—set fastest fan speed with pull chain.

W-4/W-411

W-14/W-1411

3-SPEED ♦ OPTIONAL WALL CONTROL

The W-8/W-811 wall control provides separate control of fan and light with two separate
knobs from a convenient wall location. The W-8/W-811 is designed to replace a standard
wall switch and wall boxes with a depth of 2" or greater. Requires two hot leads from wall	LO
box to ceiling wiring box.

To install a W-8/W-811 wall control in place of an existing wall switch, follow the instruc-
tions on the W-8/W-811 package.
Operation of the fan from the wall switch is simple:
1. Turn the upper knob to the desired fan speed.
2. Turn the lower knob to the desired light setting.	W-8/W-811
CAUTION! Failure to set the pull-chain speed to HIGH can result in faulty operation of
the fan and damage to the W-8/W-811 wall control. To confirm fan is set to HIGH: Turn
W-8 fan speed switch to 'HI' - set fastest fan speed with pull chain.	W-18/W-1811
	11