Casablanca Fan Company 55051 Downrod continued, 3/8”, The wires can be cut, but, can be inserted

Models: 55051

1 21

Page 8

www.CasablancaFanCo.com

1.888.227.2178

Remove the pre-installed	Hand tighten the downrod (at	The wires can be cut, but	Tighten the setscrew
setscrew so that the downrod	least 4-5 full turns) until it stops.	leave at least 8” extending	with pliers. DO NOT
can be inserted.		from the top of the downrod.	HAND TIGHTEN.

8”

If the setscrew is not tightened securely, the fan may fall.

Image 8

Contents

Table of Contents What to Expect with Your InstallationWiring TroubleshootingWhat to Expect with Your Installation 1 Standard Downrod2 Shorter Downrod 3 Longer DownrodTools Needed Wire StrippersPower Drill optional LadderOPTION 1OPTIONto hang the fan from a to hang the fan from a flat ceilingCeiling Bracket Make sure all four bumpers areIf you are unable to do this still attachedPreparation Downrod OptionIf you need a different downrod length follow these steps Steps 1-5 to remove standard downrod pipeDownrod continued The wires can be cut, but3/8” least 4-5 full turns until it stopsCANOPY OR WIRES. Place the downrod Downrod continuedDO NOT PICK THE FAN UP BY THE Let the canopy sit loosely on top of the fanWiring Wiring continued M R ECWall Control Canopy HolesScrew M6022-01 10/30/14 Casablanca Fan CompanyBlades Switch Housing Screw two housing assembly screwswrap keyhole slots around the screws and then tighten all three screwsWant to install your fan without a light kit? Light KitSocket Shade Socket Ring Socket Ring Tool Light Kit continued See next page for fan operation instructionsOperation Power Operation continuedMaintenance & Cleaning M6022-01 10/30/14 Casablanca Fan CompanyTroubleshooting AUTHORIZED SERVICE CENTERSLights dim when turned on or do not turn on at all Fan doesn’t work