Installing SoundPoint® IP 600/601 SIP
This section provides basic installation instructions and information for obtaining the best performance with the Sound- Point® IP 600/601 SIP phone. If you re- quire additional information or assistance with your new phone, please contact your system administrator.
The SoundPoint® IP 600/601 SIP User Guide includes regulatory compliance information that your system administra- tor should review and can also be found at www.polycom.com.
Powering Options for the SoundPoint® IP 600/601
Both the SoundPoint® IP 600 and SoundPoint® IP 601 can be powered from Power over Ethernet in addition to AC power sources.
For Power over Ethernet, both models will accept power over stan-
For AC power source, both models are shipped with an adapter to convert the AC voltage to the appropriate DC voltage required.
►There are differences between the DC voltages required by the SoundPoint® IP 600 and IP 601:
SoundPoint® IP 600
Requires a 12VDC rated power adapter as supplied in the original packaging. Power over Ethernet under the IEEE802.3af standard also supplies sufficient wattage to power the SoundPoint® IP 600 phone without use of the adapter above.
SoundPoint® IP 601
Requires a 24VDC rated power adapter as supplied in the original packaging. The 24VDC adapter supplies sufficient wattage to power the SoundPoint® IP 601 phone and up to three SoundPoint® IP Expansion Modules (optional accessories). Power over Ethernet under the IEEE802.3af
standard also supplies sufficient wattage to power the SoundPoint® IP 601 phone and up to three SoundPoint® IP Expansion Modules.
When powering from an AC voltage source, | |
it is important to use only that power adapter | over all input conditions. If in doubt about |
that shipped with the appropriate phone. | the appropriate power adapter that ships with |
Powering a SoundPoint® IP 600 phone from | your unit, contact your system administrator |
a SoundPoint® IP 601 phone adapter, or | for futher details and/or options. |
