To change the program change number type

While still holding down the CONTROL button, select the Program Change Mode by pressing one of the keyboard keys illustrated below.

A￿5 (black key): TYPE 1

C4

A5: TYPE 2

A note does not sound when you press a keyboard key while holding down CONTROL.

See the table on page E-23 for detailed information about Type 1 and Type 2.

General MIDI

The General MIDI System is a set of specifications for sound generating devices agreed upon by world MIDI manufactur- ers. These specifications were developed to allow the creation of music data that is not limited to specific equipment makers and models. Among other things, General MIDI defines the tone number sequence and the number of MIDI channels that can be used. Any device equipped with a sound source that supports General MIDI is able to produce sounds of similar nuances, regardless of the manufacturer or model.

The Type 2 program change numbers of your CELVIANO assign program numbers to tones so they comply with the General MIDI System.

Type 2 program change numbers make it possible to receive General MIDI System data from a connected sequencer or other device, and play it using the CELVIANO’s tones. Tone switching is performed only when a program number that corresponds to any of the CELVIANO’s non-bass tones is re- ceived. No tone switching is performed when any other program number is received.

The table on page E-23 shows the program number assignments for Type 1 and Type 2.

E-24

Turning Local Control On and Off

This setting effectively determines whether or not the keyboard and pedals of the CELVIANO are connected to the CELVIANO’s sound source, as illustrated below.

MIDI

OUTIN

Keyboard

Sound source

ON

Pedals

OFF

Local Control

When Local Control is on (the normal setting), anything played on the keyboard is sounded by the internal sound source and simultaneously output from the MIDI OUT ter- minal. When off, anything played on the keyboard is output from the MIDI OUT terminal only, without being sounded by the sound source.

Local Control can be turned off when you are using the CELVIANO as the sound source of a connected sequencer or other device, and you want to guard against sound being produced should the CELVIANO keyboard be pressed acci- dentally.

To turn Local Control on and off

While still holding down the CONTROL button, switch Local Control on and off by pressing one of the keyboard keys illustrated below.

F￿5 (black key): OFF

C4

G5: ON

A note does not sound when you press a keyboard key while holding down CONTROL.

NOTE

Note that no sound will be produced from the CELVIANO’s speakers if you press the keyboard while Local Control is turned off.

Local Control is turned on automatically whenever you turn on CELVIANO power or play a demo tune.

427B-E-028A

AP31/33_E_21_25.p65

Page 24

03.10.7, 11:00 AM Adobe PageMaker 6.5J/PPC