Casio AP-38 Using Split, To split the keyboard, To adjust the volume of the layer tone

B2 C3

+/– Number Input keys keys

•A note does not sound when you press a keyboard key at this time.

4.Release the CONTROL button to complete the procedure.

❚NOTE

•The setting you make for the main tone volume remains in effect even if you change to another tone.

To adjust the volume of the layer tone

1. Hold down the CONTROL button, and keep it depressed until you reach step 4 of this procedure.

2. Press the GRAND PIANO 2 button.

•This causes the indicator lamp above the button to flash.

3.Use one of the procedures below to set the layer tone volume to a value in the range of 40 to 127.

•To scroll the volume setting value: While holding down the CONTROL button, use the + (increase) and

– (decrease) keys to scroll the volume setting value. Holding down either key changes the setting at high speed.

Pressing + and – at the same time automatically selects a volume setting value of 72.

•To input the volume setting value: While holding down the CONTROL button, use the number input keys to input a two-digit or three-digit volume setting value in the range of 40 to 127. You can input a two digit or a three-digit value. The level you input is applied to the volume setting value when you release the CONTROL button. The volume setting does not change if you input a one-digit value or a value that is outside of the allowable range.

B2 C3

+/– Number Input keys keys

•A note does not sound when you press a keyboard key at this time.

4.Release the CONTROL button to complete the procedure.

❚NOTE

•The setting you make for the layer tone volume remains in effect even if you change to another tone.

Using Split

With split you can assign two different tones (a main tone and a split tone) to either end of the keyboard, which lets you play one tone with your left hand and another tone with your right hand.

Split point (F￿3)

Split tone Main tone

To split the keyboard

1. Select the main tone.

2. Press the SPLIT button.

•This causes the indicator lamp above the button to light.

3.While holding down the SPLIT button, press the tone button of the tone you want to use as the split tone.

•While holding down the SPLIT button, you can also press the VARIATION button to switch to the variation of the split tone.

•The tone button lamp of the split tone you specify flashes. The indicator lamp above the VARIATION button also flashes when the variation tone is selected for the split tone.

E-14		428A-E-018A
AP38_e_08-19.p65	14	02.6.12, 15:55