3Connecting the Pedal

Figure 8

Clip K

Pedal plug

Position the pedal plug as shown in Figure 8 and insert it into the pedal connector on the bottom of the digital piano. Secure the pedal cable to the upright of the stand using the

Kclips that you installed when assembling the stand (Figure

8).

4Connecting to a Power Supply

Figure 9

Power cord

Household

 

wall outlet

1.Check to make sure that the digital piano’s POWER button is in the OFF position. If it is ON, press the button to switch it OFF.

2.Attach the power cord that comes with the digital piano to the bottom of the digital piano.*

3.Plug the digital piano’s power cord into a wall outlet (Figure 9).

*applies to the AP-38V.

IMPORTANT!

•The shapes of the digital piano’s power cord and wall out- let should be different according to countries or regions. The illustrations are examples.

•With the AP-38, the power cord is hard-wired to the bottom of the instrument.

428A-E-041A

AP38_e_34-39.p65

37

Caution

The screws that you use to assemble the stand may become loose after a long period due to changes in temperature and humidity, or vibration caused by normal use, etc. Periodically check the screws used to fasten the stand and the butterfly bolts used to fasten the stand and the digital piano, and tighten them whenever necessary.

E-37

02.6.12, 15:55