Casio CDP-200R D r, m : R h y, Display, to edit, Settings, 10. Press, 5. Press bs, Setting Type, pattern you selected in step, you want (intro through ending)

Editing Auto Accompaniment Patterns

3. Press a button from bk to bn to select the					7. To edit the other contents, press 7 to display
	Accompaniment Pattern you want to edit.					the screen for the setting you want.
	The name of the pattern will appear on the display.					•	Each press of 7 will cycle through the settings shown
							below, from 1 through 6.
						•	Use the cl (10-key) [–] and [+] keys to change the
			D r	m : R h y .
							currently selected setting.
						•	You can play the current settings of the editable part by
							pressing bo.
		bm Variation selected
	Pattern selected by each button						Setting Type	Display	Settings
					1	Part on/off		Part	On/Off
	bk: Intro
	bl: Normal, Normal Fill-in				2	Tone number*		Tone	001 - 653
	(Each press toggles the selection.)
					3	Volume level		Vol.	000 - 127
	bm: Variation, Variation Fill-in
						Left-right speaker balance
	(Each press toggles the selection.)				4			Pan	–64 - 0 - +63
						(panning)
	bn: Ending
4. Press bp to select the instrument part you want					5	Reverb depth (reverb send)		Rvb	000 - 127
					6	Chorus depth (chorus send)		Cho.	000 - 127
	to edit.
					* Instrument parts 1 and 2 can be assigned drum set tones
	The part number of the part you select will flash on the
	display.				(built-in tones 654 to 670) only.
	Parts that contain data.			Flashing: Part selected for editing.	8. Repeat steps 4 through 7 as many times as
						necessary to edit the parts you want for the
						pattern you selected in step 3.
						•	If you change the rhythm number in step 6, the editable
							contents (1 through 6 in the above table) you last
							configured in step 7 of this procedure will be overwritten
				Part 6 (Chord 3)			with the settings of the newly selected rhythm.
5. Press bs.					9. Repeat steps 3 through 8 as many times as
						necessary to edit the accompaniment patterns
	This will display the rhythm number.
						you want (intro through ending).
6. Use the cl (10-key) [–] and [+] keys to select the
					10. Press 4.
	rhythm number you want to assign to the
	instrument part you are editing.					This will display a message asking if you want to save the

A different rhythm number is assigned for each instrument part.

•You can play the data of the currently selected rhythm number by pressing bo.

•All of the eight instrument parts of an intro (I-1 to 8) must have the same rhythm number. If you assign rhythm 003 to I-1, for example, 003 also will be assigned automatically to parts I-2 through I-8. If you then assign rhythm 004 to part I-2, for example, I-1 and all of the other parts also will change to 004. All of the eight parts of an ending (E-1 to E-8) also must have the same rhythm number.

user rhythm.

E-42 B