Casio CDP-200R Using Tracks to Record and Mix, Parts, To record to Tracks 1 through, • Track, English, contents, 2. Press, ■ About tracks, • Tracks 2 through

Recording Your Keyboard Play

8. Press 8 twice to exit the recorder mode.						Using Tracks to Record and Mix
						Parts
						You can divide a song according to various types of parts
						(instrument, left and right hand, etc.), and record each part to
						a specific track. You can mix up to six tracks (the original track
			Disappears			plus five additional tracks) into a final song.
	• The flashing on the screen shown in step 3 becomes					■ About tracks
		faster when remaining recorder memory capacity				Tracks are numbered from 1 to 6.
		becomes less than 100 notes.
						• If you do not specify a track number when recording,
	•	Total recorder memory capacity is approximately
						recording is performed to Track 1 automatically.
		12,000 notes. Recording will stop automatically when
		there is no more unused recorder memory remaining.				In addition to what you play on the keyboard, the following
	•	Each press of 8 cycles through the settings shown
						information also is recorded.
		below. You can listen to the recorded data as many
						• Track 1
		times as you like by pressing bo while in playback
						Settings:
		standby.
						Tone number, rhythm number, tempo, reverb, chorus,
						chords, layer/split settings, Auto Harmonize/Arpeggiator
		Recorder Off	Playback		Record	setting
						Operations:
			Standby		Standby
						Pedal, pitch bend wheel, INTRO button, SYNCHRO/
						ENDING button, NORMAL/FILL-IN button, VARIATION/
						FILL-IN button
						• Tracks 2 through 6
		Disappears	Lights	Flashes
						Tone number, pedal operation, pitch bend wheel operation

To record to Tracks 1 through 6

■To delete recorded data

After step 3 of the above procedure, do hold down 8 (without	1. Record the first part to Track 1.
pressing any keyboard key) until the message “Tr.Del?”	To record to Track 1, perform steps 1 through 4 under
appears on the display. Press [+] (YES) to delete the data, or
	“Recording and Playing Back Keyboard Play” (page
[–] (NO) to cancel the delete operation.
	E-46).
		Lights
• Turning off the piano while recording is in progress will
cause any data in recorder memory to be deleted.
• A new recording replaces (deletes) previously recorded
contents.
■ Maintaining Data in Recorder Memory			Lights
After you save data in recorder memory, it will remain there as	2. Press 8.
long as power is supplied to the piano. However, if you
disconnect the AC adaptor, data in recorder memory will be	This will enter record standby.
deleted.		Flashes

Flashes

English

C E-47