Casio CDP-200R To save a setup to registration memory, To recall a setup from registration memory, S t o r e, R e c a l l, Press, 1.Press bs

Saving Keyboard Setups to Registration Memory

To save a setup to registration memory

1.Press bs.

Lights

Bank number

2.Configure the tone, rhythm, and other settings you can to include in the setup.

3.Press cm to select the bank you want.

Each press of cm cycles through the bank numbers.

Bank 4

•You also can select a bank by holding down cm as you use the cl (10-key) number buttons to enter a bank number.

4.While holding down cr, press a button from cn to cq to select an area.

This will save the settings you configured in step 2 into the applicable setup.

•If there is anything already stored in the setup, it will be replaced (deleted) by the new setup.

Stored in Setup 4-1

S t o r e

To recall a setup from registration memory

1.Press cm to select the bank that contains the setup you want to recall.

Bank 6

2.Use buttons cn to cq to select the area whose setup you want to recall.

This will recall the registration memory setup and automatically configure the piano settings accordingly.

Setup 6-1 recalled

R e c a l l

•Notes currently being sounded by the keyboard may stop if you recall a setup that causes a change in octave shift (page E-15). To keep this from happening, either select a setup that does not cause a change in the octave shift setting, or hold down the pedal (which will cause notes currently being played to be sustained).

■Saving registration Data on an External Device

• SD memory card (page E-58)

• Computer (page E-65)

■Maintaining Data in Registration Memory

After you save data in registration memory, it will remain there as long as power is supplied to the piano. However, if you disconnect the AC adaptor, data in registration memory will be deleted.

English

E-45