Casio CDP-200R Using Reverb, Using Chorus, To change the split point, R e v e r b, R e v e r b, C h o r u s, C h o r u s, E-6), 1 to, E-6), English, Off (oFF)

	Controlling the Keyboard Sounds
5. Pressing cs again to unsplit the keyboard (so it
	Using Reverb
plays only the tone you selected in step 1).
• Each press of cs toggles between split (two tones) and	Reverb adds reverberation to notes. You can change the
unsplit (one tone).	duration of the reverb.

1. Press 7 and then use the cl (10-key) [4] (u) and [6] (i) keys to display “Reverb” (page

E-6).

							R e v e r b
			Disappears
					2. Use the cl (10-key) [–] and [+] keys to select the
• If you turn on both layer and split, layering will be applied to
						reverb setting you want.
	the right side range of the keyboard only.
	To change the split point				Off (oFF)		Turns off reverb.
					1 to 10		The larger the number selected, the longer
1. While holding down cs, press the keyboard key
							the reverb duration.
		where you want the split point to be.
		The key you press will become the lowest note of the right
							R e v e r b
		side range of the split keyboard.
		Example: Setting middle C (C4) as the split point.
			Key name
							Indicator disappears when reverb is turned off.
			C	4
					Using Chorus
					Chorus is a function that adds depth and breadth to notes. It
					makes you sound as if you are playing multiple instruments.
					1. Press 7 and then use the cl (10-key) [4] (u)
						and [6] (i) keys to display “Chorus” (page
						E-6).
							C h o r u s
					2. Use the cl (10-key) [–] and [+] keys to select the
						chorus type you want.
						There are five chorus types, plus an off setting.
							C h o r u s
							Indicator disappears when chorus is turned off.
					• The actual effect produced by chorus depends on the tone
					you are using.

English

E-13