Casio CDP-200R Looping a Sampled Sound, Changing the Volume of Sampled Sound Looped Playback, F u n k 8 B t, Press, 1.Press bs, Press the button, Press this button:

Sampling Sounds and Playing Them on the Digital Piano

■How sampled sounds are played

Pressing Middle C (C4) will play back the original sound. The keys to the left and right of C4 play the sound at different pitches.

C4

Looping a Sampled Sound

You can use the following procedure to loop a sampled sound so it continues to repeat, as you play on the Digital Piano.

1.Press bs.

2.While holding down 6, press cr.

This enters repeat standby.

F u n k 8 B t

Lights

3.Press the button (cm to cq) that corresponds to the melody sampling tone number you want to select.

This will start looped playback of the selected sound.

To select this tone number:	Press this button:
671	cm
672	cn
673	co
674	cp
675	cq

4.Press the same button again to stop playback.

5.Press cr to return to the screen that was displayed before step 2 of this procedure.

Changing the Volume of Sampled Sound Looped Playback

You can use the following procedure to change the volume level of the looped playback of each sampled sound, if you want.

1.Press the button of the sampled sound whose volume you want to change (cm to cq).

•This will cause the sounds loop to sound.

2.While the loop is sounding hold down the same sampled sound button (cm to cq) as you press any keyboard key.

•Pressing the keyboard key quickly will increase sample sound volume, while pressing slowly will decrease volume.

3.After the sampled sound is at the volume level you want, release its button (cm to cq).

E-18 B