Configuring USB Protocol Settings (USB)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device.
| Select this setting when connecting to a computer. With this | |
Mass Storage | setting, the computer sees the camera as an external storage | |
device. Use this setting for normal transfer of images from the | ||
| ||
| camera to a computer. | |
PTP | Select this setting when connecting to a printer that supports | |
PictBridge (page 117). This setting simplifies the transfer of image | ||
(PictBridge) | ||
data to the connected device. | ||
| ||
|
|
Selecting the Screen Aspect Ratio and Video Output System (Video Out)
Procedure
[MENU] * Set Up Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video output system. You can also specify an aspect ratio of 4:3 or 16:9.
NTSC Video system used in Japan, the U.S., and other countries
PAL Video system used in Europe and other areas
4:3 Normal TV screen aspect ratio
16:9 Wide screen aspect ratio
•Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use. Images will not display correctly if you select the wrong aspect ratio.
•Images will not display correctly unless the camera’s video signal output setting matches the video signal system of the TV or other video equipment.
•Images cannot be displayed correctly on a TV or video equipment that is not NTSC or PAL.
•REC mode video output is supported only when the aspect ratio setting is 16:9.
144 | Other Settings (Set Up) |
|