Configuring the Display Language the First Time You Turn On the Camera
The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images.
1.Press [ON/OFF] to turn on the camera.
2.Use [8], [2], [4], and [6] to select the language you want and then press [SET].
[ON/OFF] 
(Power)
=8?
=4? 
=6?
=2? [SET]
3.Use [8], [2], [4], and [6] to select the area where you will be using the camera and then press [SET].
The selected area is highlighted in red.
4.Use [8] and [2] to select the city where you will be using the camera and then press [SET].
5.Use [8] and [2] to select the summer time (DST) setting you want and then press [SET].
6.Use [8] and [2] to select a date style and then press [SET]. Example: 19. 12. 09
YY/MM/DD * 09/12/19 DD/MM/YY * 19/12/09 MM/DD/YY * 12/19/09
7.Set the date and the time.
Use [4] and [6] to select the setting you want to change and then use [8] and [2] to change it.
To switch between
8.Press [SET].
•If you make a mistake, you can change the settings later (pages 140, 141).
NOTE
•Each country controls its local time offset and the use of summer time, and so they are subject to change.
15 | Quick Start Basics |
|