Flash assist turned off Flash assist turned on

Specifying Flash Intensity (Flash Intensity)

Procedure

[r] (REC) * [MENU] * Quality Tab * Flash Intensity

You can specify one of 13 flash intensity settings, from –2.0 EV (weakest) to +2.0 EV (strongest).

• Flash intensity may not change when the subject is too far away or too close.

Turning On Flash Assist (Flash Assist)

Procedure

[r] (REC) * [MENU] * Quality Tab * Flash Assist

The subject in an image will look too dark if flash intensity is not enough to reach a subject that is too far away. When this happens, you can use flash assist to supplement the brightness of the subject so it appears as if flash illumination was sufficient. Select “Auto” to turn on Flash Assist. Flash Assist may not produce the

desired result if you use it after changing the initial default settings of any of the following.

Flash Intensity, EV Shift, ISO, Contrast

Using Built-in Color Filters (Color Filter)

Procedure

[r] (REC) * [MENU] * Quality Tab * Color Filter

Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple

89

Advanced Settings