4. Use [4] and [6] to select the continuous

 

 

CS speed

shutter (CS) speed you want and then press

 

 

[SET].

 

 

•You also can change this setting using the control dial.

5.Use [8] and [2] to select the bottom control panel option (Prerecord (Still image) Time).

6.Use [4] and [6] to specify how many of the 60 images and for how long images should be pre-recorded in the buffer.

Number of pre-record images and pre-record time

Shutter button full-press

Number of remaining images and remaining recording time after the shutter button full-press

• You also can change this setting using the control dial.

7. Press [SET].

Number of recordable

 

 

 

• The approximate number of recordable

CS images

 

 

 

CS images will appear on the monitor

 

 

 

 

 

screen.

Remaining snapshot

 

memory capacity

8.Half-press the shutter button.

This will cause the camera to start pre-recording images.

•The camera will not emit a shutter sound when you half-press the shutter button while Prerecord (Still image) is selected.

9.Press the shutter button the rest of the way down.

This will record the images in the pre-record buffer and start recording new images in real-time. Images continue to be shot as long as you keep the shutter button depressed.

10.Image recording will stop when you release the shutter button or after a total of 60 images are recorded.

11.Save the CS images (page 58).

51

Snapshot Tutorial