Save images to a computer automatically/Manage images
Installing Photo Loader with HOT ALBUM on your computer makes it possible to transfer images from the camera to your computer automatically.
.To install Photo Loader with HOT ALBUM
1.Start up your computer, and place the bundled
Normally, this should cause the menu screen to appear automatically. If your computer does not display the menu screen automatically, navigate to the CD- ROM on your computer and then
2.Click “Photo Loader with HOT ALBUM 3.1” to select it and then click “Read me.”
The “Read me” file contains important information about installation, including installation conditions and computer system requirements.
3.Click “Install” for Photo Loader with HOT ALBUM.
4.Follow the instructions that appear on the display to complete installation.
Checking Your Computer’s DirectX Version
In order to manage images using Photo Loader with HOT ALBUM, your computer also needs to have Microsoft DirectX 9.0 or higher installed. Use the following procedure to check your computer’s DirectX version.
1.Click the following items on your computer to display System Tools: Start * All Programs * Accessories * System Tools.
2.On the System Tools “Tools” menu, select “DirectX Diagnostic Tool”.
On the “System” tab, check to make sure that the “DirectX Version” is 9.0 or higher.
3.Click “Exit” to exit the DirectX Diagnostic Tool.
•If your computer does not have Microsoft DirectX 9.0 or higher installed, install Microsoft DirectX 9.0c from the bundled
104Using the Camera with a Computer